Help with manifold ID

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 2, 2015
Threads
43
Messages
5,237
Location
East of Eden, in the land of Nod
Can any of the distinguished members help ID-ing this intake manifold. What year/engine this came off of. Its in my collection and I don't know why..:oops:

To me, it looks like the intake runners are larger than the runners on my 76.

IMG_2612.webp


IMG_2614.webp


IMG_2620.webp
 
Not sure exactly what, but I think it’s F or F.5? Only a guess because no bolt holes for the heat shield of a 2F?
 
Shrugs shoulders…..
 
9/66-9/69: F145 Engine[3.9 liter] 2bbl aluminum intake with wide runners standard. 3bolt attachment to exhaust. 4 bolt bosses on the side of the intake for oil filter bracket, which attached via an adapter plate.

Courtesy a post by @65swb45

 
boom....!!!!

Next thread "F145 manifold for sale". ;)


Interesting, I thought the F145 was 9/67-9/69 (68 and 69 models). Believe the F135 ran from mid 1960 in the FJ25 until the 67 model FJ40 ended. I believe I see an air injection port covered in the head. That would put it pre 69. 68 California had an air pump. My 9/67 68 model had plugged air ports. It's was originally sold in Arizona late 67.
 
OK here is the Full Monty...

Happy to pass it on. The Toyota universe comes around......

IMG_2615.webp


IMG_2613.webp


IMG_2614.webp


IMG_2612.webp
 
Interesting, I thought the F145 was 9/67-9/69 (68 and 69 models). Believe the F135 ran from mid 1960 in the FJ25 until the 67 model FJ40 ended. I believe I see an air injection port covered in the head. That would put it pre 69. 68 California had an air pump. My 9/67 68 model had plugged air ports. It's was originally sold in Arizona late 67.
F145 ran from 9/66-1/72. Microfiche shows the piston change in 1/72 that marked the beginning of the F155.
 
F145 ran from 9/66-1/72. Microfiche shows the piston change in 1/72 that marked the beginning of the F155.

Do they show valve cover and manifold changes during the F145 run period? Every 67 I've seen have the early valve cover, manifolds and thermostat. Quick check shows @wngrog AZ FJ45 find made during 1967 as an example. As for the F155 I've seen that on many 70 and.71 valve covers. Have very few microfiche but have two for November 1967 for the FJ55. Checking carburetors trying dating one of the small window one barrel carburetors one set show only one carburetor and the other shows three different ones. I have never figured out what Toyota used to determine what made a change from one number to the next. The pistons changed 1/72 but they also changed 9/72 again. The F155 didn't change until the 2F.

I will say dates are from what I have observed over the years. Never seen any Toyota parts system that actually calls an engine anything but F, 2F or 3F on 4X series with a petrol engine engine.
 
That’s the “big manifold” that was offered on a F145 for a couple years.

If you are using an pre-75 air cleaner, this manifold is often used as a power upgrade in any F145 through 2F. All you have to do is enlarge the holes for M10
 
Back
Top Bottom