HELP! Leaking inner axle seal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 29, 2006
Threads
14
Messages
61
Location
Charlotte, NC
Hey all,

I have a leaking inner axle seal. It has been going on for a few weeks now. I got the parts from Cruiser Outfitters as everyone here suggested but having a hard time finding anyone to put it on for me. I am willing to give it a go myself, but wanted some advice.

Also, I am worried about driving it for so long leaking, although I have heard it should be OK. My steering seems to be pretty loose now though...not sure if it is my head or not.

Any how-to on this would be great. Unfortunately I am not all that savvy with the inner parts of the vehicle so some of the words that many are used to won't mean much to me. I could use a picture tutorial. Not asking anyone to make one, but if you know of something somewhere that would help I would greatly appreciated it.

Thanks a ton.

- Mike
 
If you look up a few threads you will see a thread titled FAQ for 80/lx450 series.

If you scroll down to the maintenance section, you will find this thread

https://forum.ih8mud.com/showthread.php?t=78276

Thats pretty much how you do it.
 
Might want to update your profile to put your location in and then add your rig specs in your signature line.

Probably some folks here from around there. You could check the club house corner as well.
 
Thanks. I edited my sig. I will check the club house for contacts.
 
Hey all,

I have a leaking inner axle seal. It has been going on for a few weeks now...

...Also, I am worried about driving it for so long leaking, although I have heard it should be OK. My steering seems to be pretty loose now though...not sure if it is my head or not.

A few weeks??

No way is that going to do further damage if your diff. gear oil and your knuckle grease are in good shape. (PO's around here have let that leak go for way longer than that.) Can't see how it'd affect the steering either.

One thing to watch is you can conceivably foul the front brake rotors with the gear oil dripping onto the tires etc., causing an unsafe situation.

Hang in there,

Curtis
 
I've got the same problem. Bring it over to my house and we'll work on it together.

Do you mind swinging over to Colorado to pick up some things for me?
 
All the info and pics you need are on in the FAQ section. Search on any topic you feel uncertain of. This same problem spawned my introduction to IH8MUD, and it was also my first major wrenching project. Spend an evening checking out the FAQ and the appropriate threads. Print anything you might think you need. Get ALL the tools and parts together and go for it. It is not difficult.

Of course, having some experienced help is always nice. I'm on the other end of the country or I would help you.

Ryan
 
Thanks everyone. I am constantly amazed at how nice people are on the forum and willing to help. IH8MUD rocks!
 
It's fixed!!

I just wanted to follow up on this post. Mainly because I found a great shop near Charlotte and also because of the "loose" steering problem I was having as well.

A good friend directed me to a few places that eventually led me to Don Lambiotte at Toyotal Specialty (see more contact info below). Don gave me an extremely reasonable quote over the phone for just replacing the axle seal. I also had a knuckle wiper but he told me that work would probably double the price. I didn't mention anything about the steering because I forgot. He called me about 2 hours after I dropped it off and told me I had some other problems. Great I thought...already trying to get in my wallet. But he told me that my steering rod\arm was about to come loose from the wheel. It has 4 bolts in it. 2 had broken off and 1 was missing! The remaining bolt was being held on by about 2 threads. Holy Crap!!! Man am I glad he caught it. I could be dead right now.

Anyhow, all together with an inspection it ran me around $350. Extremely affordable and the turn around was quick. I hope this throws him some more business. I'm sure at some point I will need to go back again.

Toyota Specialty
13417 Highway 74 East
Indian Trail, NC 28079
Behind Tire Discount

Phone: 704-893-0741

This place is easy to get to for anyone around Charlotte. Take 485 to Independence (Hwy 74). Go East and about 1 mile down you will see a Discount Tire store and the sign for Toyota Specialty on the left. Go a little passed it and make a u-turn to head back to it. Go all the way back and you will see the shop.
 
Thanks for the follow-up.

A good shop is hard to find. Sounds like you found a winner!
 
Don gave me an extremely reasonable quote over the phone for just replacing the axle seal. I also had a knuckle wiper but he told me that work would probably double the price.

Well, I don't want to rain on your parade, but don't start celebrating just yet.

It is impossible to replace the inner axle seal without removing the knuckle wipers. There is no way that should double the price and the fact that he didn't use the wiper seals means something is rotten in Denmark. What is the p/n of the inner axle seal that you had replaced?



... also ...

But he told me that my steering rod\arm was about to come loose from the wheel. It has 4 bolts in it. 2 had broken off and 1 was missing! The remaining bolt was being held on by about 2 threads.

You should be glad he found this and fixed it. We have seen this quite a few times and 3 or 4 times just recently. It is a potentially very dangerous failure. To repair this properly, he should install 4 new lower studs and torque them ~60 ft/lbs, then install 4 new nuts. The studs & nuts are specific to this application and only OEM Toyota parts should be used.

-B-
 
Well, I don't want to rain on your parade, but don't start celebrating just yet.

It is impossible to replace the inner axle seal without removing the knuckle wipers. There is no way that should double the price and the fact that he didn't use the wiper seals means something is rotten in Denmark. What is the p/n of the inner axle seal that you had replaced?
-B-

B thats not true

When I re-geared I did it just that way. You don't remove the knuckle. I had 20K miles on my front axle clean rebuild and talking with Dan and a Master Mechanic I went that route.

I changed the seal because I was there. Had to pull the axles to get the diff out.
 
Well, I guess it is possible but not logical and it doesn't increase the work by double.

attachment.php


This is a picture from the FAQ of the inner axle seal and the wipers.

attachment.php


This is a picture with the knuckle housing still on. You can get to the inner axle seal but why would you replace that and *not* replace the wipers. Doesn't make sense to me.

-B-
 
actually this picture is more like how just the seal is done. You leave the knuckle and steering arm in place. You don't touch or repack the trunion bearings this way

attachment.php
 
Well, I guess it is possible but not logical and it doesn't increase the work by double.

attachment.php


This is a picture from the FAQ of the inner axle seal and the wipers.

attachment.php


This is a picture with the knuckle housing still on. You can get to the inner axle seal but why would you replace that and *not* replace the wipers. Doesn't make sense to me.

-B-


It's called "taking a shower and then putting your dirty shorts back on".......
 
Ahh I see the second picture you posted now. Same one I did.

I just needed to get the birfs out and replaced the seal while I was there. The wipers were in great condition.

My Master Mechanic friend says he almost always breaks it down only to the knuckle unless the wipers look bad or he knows it's been well over 100K miles. The wipers job is to keep dirt out of the knuckle and tjey can do that a lot longer than a seal can last.
 
It's called "taking a shower and then putting your dirty shorts back on".......

well now you were the one who said "putting my dirty shorts back on was the way to go." when I re-geared
 
Back
Top Bottom