Headliner re-coloring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 9, 2007
Threads
39
Messages
118
Location
Kennedrunksnort Maine
I tried out the duplicolor fabric and vinyl paint on my headliner and rear carpet because of some funky stains from prev. owners. I like the color change and the odor from the paint is gone already. It freshens things up and went on light. Duplicolr med gray for those w/ the 96 white/grey leather combo. You can see the color difference on the sun visor and sunroof closure.

I'm re-doing the front leathers next-I started last fall on them w/ Magic Mender dye but the temp was not right and it didn't come out right. Also noticed that some leather cleaners strip the dye off.
Anyone have experience with the Magic Mender and keeping it on? I have seen the Colorbond threads and it looks better but $15/can seems pretty $$$ and the recent post had 9-10 cans used for the fronts.
color difference.webp
headliner redo.webp
rear carpet.webp
 
Thread revival!

My headliner is filthy! Mud, blood, grease, soda, beer, dog slobber, surf wax and so on have left their marks. I was truly looking at recovering it, maybe with a digi camo pattern, but the thought has crossed my mind to just paint it, if possible. Bottom line is I don't want to ruin my headliner, as I know what the OEM replacement cost is :eek:. Does painting it just sound like a bad idea? It looks halfway decent in the photo above...
 
Paint with actual paint...horrible idea. Paint with dye...might work ok, depends on the material / dye combo.
 
find a beat junkyard headliner and try it out. I'd imagine the headliner from a similar vintage toyota/lexus would be a similar material if you can't find an 80 in the junkyard.
 
Strip off the fuzzy material and then apply Alcantara or other UltraSuede product. It will come out bitchin'!

Plus that stuff is impervious to everything.
 
I'd use the Duplicolor Fabric spray. What I'll probably do is test one of the pillar pieces with Duplicolor. But ultimately recovering is probably the answer. Is Alcantara the stuff? Does it need to be foam-backed? My truck gets pretty filthy, so it needs to clean up. I was thinking some waterproof mil spec camo fabric but A it might be too much pattern-wise and B I'm not sure it would stick to the headliner.
 
$130 per yard for Alcantara. Ooof. Geesh, it's a truck not a Ferrari. Quest continues...
 
Alcantara is ideal for UV specific conditions. UltraSuede for headliner is fine. Much cheaper. I can get Alcantara for less but not much less

Each you can get foam backed if needed.
 
I have used Alcantara, Ultra Suede and Ultra Leather on Rovers over the years as they have a sagging/glue issue. Personally, I preferred the smooth finish of the Ultra Leather for the headliner (make sure its dual stretch...many offered are only single so makes for a difficult installation on contoured sections). Nothing seemed to leave any permanent marks or trails regardless of the origin. Foam backed or a layer of foam first is still preferred. With that said, I just covered a dash with Alcantara and really like it as well and have owned several modern German vehicles with it from the factory, good stuff.
 
I used Marine vinyl ..cost for the vinyl was about $100 to cover everything.. The fuzzy stuff came right off clean using a little heat from a heat gun. The type of glue you use is the key and cannot be purchased at any of the big box stores.... I tried them all and ended up at a carpet installation product store and bought Parabond M250 its extremely flammable. If it's not flammable it won't hold for long,




p1010839-jpg.533002



p1010842-jpg.533003




p1010860-jpg.533341


p1010861-jpg.533342


p1010865-jpg.533343

p1010912-jpg.535414


media.nl
 
I used Marine vinyl ..cost for the vinyl was about $100 to cover everything.. The fuzzy stuff came right off clean using a little heat from a heat gun. The type of glue you use is the key and cannot be purchased at any of the big box stores.... I tried them all and ended up at a carpet installation product store and bought Parabond M250 its extremely flammable. If it's not flammable it won't hold for long,

finish looks great... BUT if it's extremely flammable, isn't it a higher risk for a fire in your car, let's say camping back open, something flies in by accident. or am I being a pink panty?
 
finish looks great... BUT if it's extremely flammable, isn't it a higher risk for a fire in your car, let's say camping back open, something flies in by accident. or am I being a pink panty?

..... and some how ends up between the fiber board and headliner??? hahaha

A local Porsche restoration shop recommend the glue. Its used primarily used on vinyl baseboards in commercial buildings.. superior bonding.
 
Alcantara is good stuff, but way overpriced if you ask me (been selling auto upholstery supplies for over 20 years). Same with Ultrasuede. If you put any kind of light colored suede headliner, expect to get it dirty if your not real careful. Sometime we get Alcantara overruns from Germany and it looks awesome.

The 95-97 headliners are much easier to work with because you can pull out the headliner board, apply a thin 1/4 or 1/8 foam and glue on any kind of lightweight material (headliner vinyl, headliner cloth, Alcantara)

I will be reupholstering my car real soon along with a new headliner and I am also going be using a marine grade vinyl headliner. Cost effective, good UV stability and meets all US MVSS302 automotive specs. Plus my car is a 94 so its harder to install vs a 95-97. The 93-94 uses a older bow style suspended headliner and I think the vinyl or a foam backed headliner with some stretch will look nicer.

BTW all good quality upholstery glue is flammable, even the glues used by the current OEMs. The fabrics are what helps slow down the fire before the amber reaches the glue. Water based glues=falling headliners, don't ask me how I know:)
 
Thanks for all of the replies (ha, I've hijacked the thread). I have some Duplicator HVP111 on it's way in the mail - going to start there, and still looking for headliner material. And I do intend to get it dirty, like 2 kids with muddy moto boots changing in the back during a high desert rain/snow storm dirty. Marine vinyl could be an option...
 
finish looks great... BUT if it's extremely flammable, isn't it a higher risk for a fire in your car, let's say camping back open, something flies in by accident. or am I being a pink panty?

True, when in use. Most of the flammability is the solvents, they are volatile, so evaporate, dissipate relatively quickly. Once fully cured, the parts are in use, likely not much if any more flammable than the plastics, vinyl, etc, in the rig? Contact cement has been used by new car manufactures just about forever, hasn't proven to be a problem?
 
Back
Top Bottom