Media GX460 / Prado150 pic thread

Photo/Video/Audio threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1000005573.webp
 
onelittlestar said:
We've got a Snakebight full carbon, nothing but a PITA, glad I kept our HB too... they're certainly beautiful though
Click to expand...
I’ve have nothing but great reviews for our Islamorada, it’s a 50%. We had an East Cape EVO before the Chittum. Love the HB’s, good buddy has a Marquesa and loves it.
 
Carnevino said:
I’ve have nothing but great reviews for our Islamorada, it’s a 50%. We had an East Cape EVO before the Chittum. Love the HB’s, good buddy has a Marquesa and loves it.
Click to expand...
Leaky leaky...no such thing as a dry hatch on mine...their build quality is so hit and miss, all depends on who specifically was rigging your skiff. I must have lucked out with one of the methy ones.
 
Good time up the M.E.T. Let’s see your snow pics!!!
IMG_1924.webp
IMG_1925.webp

Became a gaggle when people were getting stuck and not able to make it through the powder (not seen up the hill).
IMG_1928.webp

I use these magnets I got from Amazon to keep my air hoses off the ground. Works nice, especially if there’s mud!
IMG_1929.webp
 
Nice. I just toss my setup in the mud, it lives in a milsurp laundry bag.
 
Hiluxforever said:
Nice. I just toss my setup in the mud, it lives in a milsurp laundry bag.
Click to expand...
That’s probably the easies way. I don’t have a proper container for mine yet and it just flops all over my other stuff.
 
Green4Gulf said:
That’s probably the easies way. I don’t have a proper container for mine yet and it just flops all over my other stuff.
Click to expand...
The GI laundry bags are a nice size for stuff like that. I have a bunch of those and a few A bags for camping stuff.

I keep my sensitive stuff in the toolbox that my ARB HO Single compressor came in.
 
Green4Gulf said:
Good time up the M.E.T. Let’s see your snow pics!!!
View attachment 4056458View attachment 4056459
Became a gaggle when people were getting stuck and not able to make it through the powder (not seen up the hill).
View attachment 4056460
I use these magnets I got from Amazon to keep my air hoses off the ground. Works nice, especially if there’s mud!
View attachment 4056461
Click to expand...
Brilliant idea adding magnets to your air lines! I'm always being careful not to let the hose lines with the valve chucks drop in the dirt or get any crud in them.
I'll have to design some, (3D) print them out and clip them to my air line!
I have a ton of small magnets from another project I can use.
 
r2m said:
Brilliant idea adding magnets to your air lines! I'm always being careful not to let the hose lines with the valve chucks drop in the dirt or get any crud in them.
I'll have to design some, (3D) print them out and clip them to my air line!
I have a ton of small magnets from another project I can use.
Click to expand...
They help out a lot. I was getting dirt and stuff in the air chucks. Gets real annoying after a while. If you make those 3D printed ones you’ll have to show us.
 
My new air regulator.
1000003586.webp
 
r2m said:
That looks like a great accessory till I looked it up. Had to swallow hard when I saw the price.
Me thinks we stay with using the OBDII live TPMS readings to gauge my tire inflation/deflation.
Click to expand...
I get ADHD and want to talk with folks on group runs.

I had to process the price over a year.

It will be nice to have a futz free setup that just works and doesn't have to be watched.

I also waited until it was 15% off. Which helped.
 
Green4Gulf said:
If you make those 3D printed ones you’ll have to show us.
Click to expand...
I have no problem printing them. The only issue would be what size tubing/air hose the clip needs to go on. My hose is fairly small diameter, but I know some of these inflation manifolds could be 3/8" or so.
Yeah, I can design enough flex for any hose, but, most 3D filament will snap and break in cold weather (near freezing °F). Anything made with a resin printer just will not work at this time. There is so much R&D for 3D printers, FDM and resin, along with material advancements, that this is always changing.
I may have a filament (TPU) that may work under any conditions. I printed myself a belt sheath for my Leatherman Surge from this material and it has been awesome over the past year or so.

If I do this, I'll post if MUD let's me upload STL files, or give the files to those who have 3D printers.
Or, I can print the clips for what they cost me. I'm thinking maybe $5.00 for a half dozen, maybe a wee bit more if I'm adding the magnets to the print. But can purchase your own magnets from Amazon. I'd give a link to them.

Maybe I'll design them while on vacation, between skiing and the grandkids?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom