guess what i found

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2005
Threads
68
Messages
543
Location
Atascadero, CA
ok i just got my cruiser street legal and it has been drivin 3 tiimes on teh road. alright my dad was driving it today and i was riding shotgun and we pull up to a stop and then try to pull away and nothing. clutch doesnt work. so we turn it off put in in gear and start it back up and keep driving. we get to autozone and stop and take a look. i find some little pieces of cloth coming out of the hole in the bellhousing. so we start it and jam it into gear and go home. we took off the inspection plate on teh bottom and i have an entire rats nest in there. we pulled out like 3 handfulls of crap and stuffing. nasty nasty s***.

ok now for a question. for those of you with a sbc 350 and a toyota 4 speed, how did you line up the clutch slave cylinder and teh uh... i cant remember whats its called. the arm that comes out of the bellhousing and makes the clutch work. i cant get that thing to line up with the slave so i keep bending and breaking the push rod things.

sorry for not knowing the names of stuff.

thanks
 
If your talking about the bracket to hold the slave onto the bell housing you should be able to buy one at any place that will sell you the sbc conversion,or make one from somebody elses example.
 
The clutch slave bolted to holes supplied in the AA cast aluminum belhousing for the SBC to Toy 4 speed adapter. Had another 40 many moons ago that used the Downey/GM cast iron belousing with 1/2" thick steel adapeter plate and it came with a little cadmium-plated adapter/mounting bracket. Which set up do you have?
 
i was wrong the slave was mounted correctly. i thought it was off and thats why the clutch didnt wokr. i found out today that i get the privelege of taking out the trans and replacing the clutch. thanks for the responses though
 
Back
Top Bottom