- Thread starter
- #101
2026
Grampys Truck
- Thread starter Firemedic831
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Impressive welds, Jeff!
- Thread starter
- #104
Mar Tec
- Thread starter
- #105
I flew out to Fl to meet my new Grandson he was a week old 
. While I was in Fl I was able to buy nice 80 series from my friend in Fl. Then I drove it home . 3 days sitting in a car gave me time to order parts
. While I was in Fl I was able to buy nice 80 series from my friend in Fl. Then I drove it home . 3 days sitting in a car gave me time to order parts
Last edited:
- Thread starter
- #106
So I sold my double cab while I was driving back and went shopping
- Thread starter
- #107
Big thank you to Luke at 4x4 labs. For coming in when the shop was closed . With rear bumper secured I was able to get a front bumper from
Bellfab . Come up winch 9.5 trail
Edition winch . Then a call to Metal Tech for links and sliders . Idaho overland for suspension parts . Delta vs. for some parts.
Bellfab . Come up winch 9.5 trail
Edition winch . Then a call to Metal Tech for links and sliders . Idaho overland for suspension parts . Delta vs. for some parts.
- Thread starter
- #108
Arb fridge . I do not like yellow shocks so I have new Dobinson IMs shocks on the way . Ordered a new matching wheel for a spare . Next up
A new T case from Valley hybrids. With lower low range gears and lower hi range gears with part time 4x4 conversion. I have been talking with Cruisers and company And a Turbo will be going on after I get the Tacoma finished up . I also got new RCV shafts . The 80
Is a 1995 factory triple locked
A new T case from Valley hybrids. With lower low range gears and lower hi range gears with part time 4x4 conversion. I have been talking with Cruisers and company And a Turbo will be going on after I get the Tacoma finished up . I also got new RCV shafts . The 80
Is a 1995 factory triple locked
- Thread starter
- #109
That was a lot of work but I got it 
. Everything is tacked together. Now I can pull it and finish weld everything and paint it . Finish the paint on the truck then set it back on .
. Everything is tacked together. Now I can pull it and finish weld everything and paint it . Finish the paint on the truck then set it back on .
- Thread starter
- #111
i can
- Thread starter
- #112
Made progress
- Thread starter
- #113
Little more
- Thread starter
- #115
Branik. 300m shafts
Nice! Stan makes great stuff. I have his front 14" brakes and aluminum links on my race car.
- Thread starter
- #117
Very high quality parts .
- Thread starter
- #118
Not a lot of progress. I am dealing with back issues again 
. But I was able to get the cage pulled and fully welded out . It’s off to PC. Then I can glue it back on .
. But I was able to get the cage pulled and fully welded out . It’s off to PC. Then I can glue it back on .
- Thread starter
- #119
Been adding some stuff when I can
- Thread starter
- #120
Since I am still undecided if I should get Plush or cut pile carpet 
today I had some friends come over and help me put the cage on .
today I had some friends come over and help me put the cage on .