GCLC Local Classifieds (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

posting this here to see if you guys can help me out.
I am looking to buy one 40” tire to be used as a spare. I am trying to see if I can find a used one before buying a new one.
So please reach out to me if you have one or know of someone that has one for sale.
I’m located in Raleigh NC area but I’m sure I can figure out how to mudship it to my location. I will also be at cmcc so that might be an option for me to get it as well.

Thanks
Del R.
 
Also selling a well built Chevy Dana 60 (8 lug) pass side drop. 5.38 gears with Yukon locker, branick 4340 stubs and inner axles 35 spline, tubes were cut on both sides for a 64” wms and turned to a 6 degree positive caster. It comes with stock knuckles. Brakes are upgraded to 3/4 ton (lighter). Axle is clean to receive new brackets of your choice. Asking $1800. All brand new
Those are old pics

FA47E977-139E-4805-85E1-22D7DBBB84DC.jpeg


7F43C67C-8BE6-4E73-9CE4-A88C82550879.jpeg


9F7950B2-D3C8-4E6E-9767-AD032F5406B9.jpeg
 
Still interested if these happen to still be available. TY
Im so sorry... ive never gotten updates about this thread. Yes, I have them. my cell is 718-five-9-four-zero-9-six-two
 
WTB FJ40 tire carrier 06/80-1983 only
Lmk if you have one 🙂
I am in long island
 
Cross post from Keystone board - looking for FJ60 rear leafs that aren’t wasted (cause mine are!), FJ60 rear axle shafts, 4.10 or 3.73 3rd, and a 33” spare wheel/tire. Thanks in advance!
 
Not sure if this is the right place for this but anyone selling a rust free (like west coast truck rust free) well-maintained 100 series please hit me up, I'm in LI but often in Brooklyn. Thanks
 
I am pulling my 1993 drive train soon. Engine has approx 250K. Runs very strong, does not leak oil. I occasionally get a puff of blue smoke on startup. The engine does not have a power steering pump, I removed and made a block off plate, to run full hydro. A442 Trans shifts well but could probably use new shift solenoids. Transfer case has Trail gear 3.0 under drive gears installed. The package is in my buggy and I am doing a 2UZ swap this winter. The engine will come with harness and ECU. I would like to sell the entire package but would be willing to separate. I don't think I can ship, so local pick up or I will deliver within 200 miles for fuel. I am open to offers. Currently plan is to leave engine in truck until late November so if anyone has interest they can hear it run and drive. Located in Chelmsford, MA 01824.
 
Looking for some help fellas. I punctured a sidewall at fall crawl and my tire size has been discontinued so I am screwed. I am looking for a 275/80/17 goodyear mtr (35x10.5) I think some landcruiser guys put them on 200s. If you know anyone that has one (looooong shot) please let me know. Thanks
 
 
Complete stock FJ60 front axle - locking hub to locking hub, includes stock diff. Located on Long Island, NY
Can deliver to GCLC Winter Meeting in NJ on Feb 18
Picked up on Long Island: $650
Delivered to meeting: $700
 
FREE - 97 Coil Springs mileage unknown. Probably 100K + if I had to guess.

IMG_1077.jpg
 
Coil Springs for 80 Series

OME 2851 - Lift Springs, Coil Springs, Front, 220 lbs./in., 0.5 - 2.0 Lift, Black Powdercoated, Toyota, Pair ($165)
OME 2860 - Lift Springs, Coil Springs, Rear, 220 lbs./in., 0.5 - 2.0 Lift, Black Powdercoated, Toyota, Pair ($165)

Had them on my 80 for 3 weeks with roughly 400 miles on them. Pick up NY or can ship but will have to add shipping costs.

IMG_1079.jpg
 

Users who are viewing this thread

Back
Top Bottom