Frame off

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 13, 2003
Threads
163
Messages
2,658
I sorta thought the PICs might be interstring. This is day 1-4 working 4-6 hrs a day.
IMG_2648.webp
IMG_2652.webp
IMG_2657.webp
 
What are you trying to do .. make us all feel bad? It took me 2 months to get that far.

Good work!

Nocents
 
In my experience a digital camera would be useful during a tear down. You can take detailed pics of the way parts fit together, groups of parts with their hardware, etc then label the hardware in detail and refer to the pics (3) years later when you finally get around to assembling the rig. I often have difficulty remembering what went where and how.
 
DocB said:
In my experience a digital camera would be useful during a tear down. You can take detailed pics of the way parts fit together, groups of parts with their hardware, etc then label the hardware in detail and refer to the pics (3) years later when you finally get around to assembling the rig. I often have difficulty remembering what went where and how.


After viewing my digital photos on this post what exactly is your point? Just maybe I know how it all goes together?
 
Just curious, I assume you are doing a full resto. How long will it take? Is the rust seen in the pics something that can be fixed? What are you doing with the mechanicals? Very cool to have the time, space, tools, knowledge, etc to make it happen. Keep the pics coming.
 
it's always cool to see buidup threads!!!!!


love the ceiling chain hoist. i have already designed my "dream shop" in my head for when we move and get more property, and the ceiling hist will definetly be part of it!
 
Not a harassment David but.............4 days? My buddy Russ and I did a personal best of stripping 3 Fj40s to bare frames in 1 day. With hand tools. And a lot of caffeine!
 
65swb45 said:
Not a harassment David but.............4 days? My buddy Russ and I did a personal best of stripping 3 Fj40s to bare frames in 1 day. With hand tools. And a lot of caffeine!


So you are on the pipe again?

It could have been done faster but the tards are working slow, bagging and tagging every part as we go.
 
Landpimp said:
those axles look kinda close together :D


it's like the tard-mobile... the short cruiser


malphrus
(i'd be on it if it stopped close enuf to my house...)
 
Whose blood is it on the driver's side of the top?

Oh yeah, besides the chain hoist, I vote for the PB Blaster as the most useful tool I saw for this job...
 
Back
Top Bottom