Fox vs OME shocks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm well aware each one of us have the own " comfort " or " good " version of the shock .. but again, your opinion is as valid as other even tho you share your own version of good or comfy . .

this is all about this thread and feedback we can get from other who had one or the other ..

And my OME shocks are close to the end of the useful life, but I remember pretty well how it was, I mean how they feel when new ..

I'm not yet in the point of my life I can spend 2K on shocks but I hope some day I can ..
 
So what Im getting is if i go with an OME lift I might think about nixing the OME shocks and sticking going the Bilsteins? Was considering the whole OME 2" package.
Have Bilsteins on one and the ride is sahhhweeeet on or off road. Sounds like the feeling is the OME shocks aren't that great? Dont want to deal with remote res shocks, don't know anything about Fox products, and seems the price on the Bilstein 5000 wasn't super painful.
 
Fox 2.0 is available without remote reservoir. And about $460 for all 4 corners on ebay. Surprisingly good deal considering the quality and competition.
 
I've had my Fox shocks in for 2 months now, really happy with them.
 
Forgive me if I'm mistaken, but aren't the Fox shocks rebuild Able? That to me would make a big difference, and if they are rebuild able I would assume you could have them revalved as well. Decades of racing and tuning dirt bikes has given me a decent feel for tuning
shocks. Mine has OME with a 4" lift. I think the ride is just okay.
 
Yes they are. Roughly $50/ shock.
 
Out of the box, the Fox shocks look and feel like they're in another league compared to the OME. The spun bodies, anodized billet eyelets and removable/rebuildable seals look way beyond the $120 price point. The on-road experience is excellent... the high speed valving soaks up the harsh, broken concrete freeways of SoCal. The low speed valving keeps body roll to realistic levels and I haven't noticed any unexpected bounce. I highly recommend the shields (to protect the shock shaft) offered by fox for the rear shocks. I have no experience with Fox's customer service, so can not comment there. Bottom line, the Fox shocks are quite superior to my experiences with both stock and OME/L shocks. I've heard a number of people complain that the springs in their OME lift are too harsh. It ain't the springs...

BTW, I love the fact that there is a company out there developing shocks for the 80 series, offering multiple lengths based upon lift.

Here they are flexing out:
 
Last edited:
Fox 2.0 is available without remote reservoir. And about $460 for all 4 corners on ebay. Surprisingly good deal considering the quality and competition.

do you have a link ? can't find that deal

Thanks
 
Just checked.. Couldn't find them either. Most of us got them from downsouth Motorsports on ebay, using the "or best offer" option, suggesting $230/pair, and in my case they accepted the offer immediately.

You might try contacting them to see if they'll post more auctions.
 
This is next on my list. Have you used them on any washboard roads? That's where my OME shocks suck.
 
I'm super pleased with May 2.0s. They replaced bilstiens...the billies were nice and addressed all my ride concerns...but the fox's just take all that up to eleven...ride is vastly improved in all facets of driving
 
This is next on my list. Have you used them on any washboard roads? That's where my OME shocks suck.


For the most part the very small grading patterns/washboard can only be helped with lower tire pressure. But anything else the the fox is vastly better. It's like comparing iPhone 6 plus to the first iPhone.
 
Sorry for the.stupid question but how difficult are shocks to swap. I think my OMES are about dead. Seeing more and more bounce on the driver front when I hit even small bumps.

Any tricks? Should I lift by the axel or.body when doing shocks? Don't need to touch the springs, just the shocks

Did an.axel swap last year so don't think.it will be nearly that involved.
 
No need to jack up. Just unbolt, remove & replace.
 
What's the L shock replacement model number? The Fox that would have the same measurements. Thanks in advance.
 
Sorry for the.stupid question but how difficult are shocks to swap. I think my OMES are about dead. Seeing more and more bounce on the driver front when I hit even small bumps.
Any tricks? Should I lift by the axel or.body when doing shocks? Don't need to touch the springs, just the shocks
Did an.axel swap last year so don't think.it will be nearly that involved.

If you've done an axle swap you won't have trouble, but fitting new shocks isn't exactly as easy as taking off a tire. My Fox shocks were quite stiff when new, and despite being an athletic 220# I wasn't able man-handle the lower connections into place without manipulating the axle. I ended up putting the truck on jackstands and using a jack under the axle to lower and lift the axle to get the lower attachments started. Also thick silicon grease on the rear lower shock mount post.

Also, the hex in the end of the fox shocks for backup when tightening the nuts is 1/4".. 6mm will fit but won't be tight and you may strip it.
 
Part Numbers per Fox Website:
Toyota Land Cruiser 80 Series 4WD 1997-1989 Front 1-2.5" 985-24-070
Toyota Land Cruiser 80 Series 4WD 1997-1989 Front 3-4" 985-24-076
Toyota Land Cruiser 80 Series 4WD 1997-1989 Rear 1.5-2.5" 985-24-073
Toyota Land Cruiser 80 Series 4WD 1997-1989 Rear 3-5" 985-24-087
 
Check the specs on those shocks.. I got the shorter ones and seem to remember them having extended lengths similar to the 4" OMEs.
 
2 notes ..

1. I would like to see 3" - 5 " for the front ( or just plain 5" but I need longer shocks for front )

2. Not an easy job to compress those brand new FOX under the truck without lifting it ..

FOX / OME comparo

20150523_160335.jpg


20150523_180723.jpg
 
Back
Top Bottom