For Sale/Wanted To Buy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm selling my 1997 40th anniversary FZJ80 Locked. It has 198k miles on it and has a few things that need to be fixed but other than that it drives great.

•*Needs rear caliper replaced
• New exhaust possibly (sounds like a leak somewhere near the cats)
• Speakers
•*It has always had a small front engine oil leak but its not bad

I'll entertain any reasonable offers...
 
FZJ80 said:
I'm selling my 1997 40th anniversary FZJ80 Locked. It has 198k miles on it and has a few things that need to be fixed but other than that it drives great.

•*Needs rear caliper replaced
• New exhaust possibly (sounds like a leak somewhere near the cats)
• Speakers
•*It has always had a small front engine oil leak but its not bad

I'll entertain any reasonable offers...
Click to expand...

Pics, price & maintenance history details would be helpful, i.e. like if HG has been replaced or if the front end rebuilt/resealed has been done would be helpful. Also, any mods that you or a PO may have done.
 
Well yall think its time to let my BEAST go.
Would love to trade Straight up for a Stock FZJ80 for mine

- Slee 6in springs
- OME shocks
- Slee adjustable panhards front and rear
- Slee sway bar extensions (sway bars removed) will be installed if needs be
- Slee front control arms
- Slee SS brake lines
- Opima yelow top
- ARB bull bar
- T-max 12,500 winch
- Stock Factory radio
- front speakers replaced
- Specter off-road camo seat covers
- remanufactured brake calipers w/ new pads
- New radiator, fanclutch,
- High output alt from sequia, new belts
- frontaxle has been rebuilt
- Rear IPOR bumper
- AC still blows cold
- no carpet, no headliner

old pics here
 
Last edited:
It's a sad day when everyone has to sell their toys...

Any idea how much??
 
Im really leaning towards a trade for and FZJ80, need the 2nd vech.
 
BenMara said:
Well yall think its time to let my BEAST go.
Would love to trade Straight up for a Stock FZJ80 for mine

- Slee 6in springs
- OME shocks
- Slee adjustable panhards front and rear
- Slee sway bar extensions (sway bars removed) will be installed if needs be
- Slee front control arms
- Slee SS brake lines
- Opima yelow top
- ARB bull bar
- T-max 12,500 winch
- Stock Factory radio
- front speakers replaced
- Specter off-road camo seat covers
- remanufactured brake calipers w/ new pads
- New radiator, fanclutch,
- High output alt from sequia, new belts
- frontaxle has been rebuilt
- Rear IPOR bumper
- AC still blows cold
- no carpet, no headliner

old pics here
Click to expand...

If it comes to parting I'm interested in the arb. Doubt it will come to that.
 
Does any one have any caster correction shims for my 62? 4 or 6 degree
Or where can I get some?
 
dbenke said:
Does any one have any caster correction shims for my 62? 4 or 6 degree
Or where can I get some?
Click to expand...

I don't have any now they are installed , but I did happen to remember that I have a axle relocation pad for the rear axle pac(a 4+) product. Fits like a camber shim in the rear axle pack and moves the axle foreward or backward app one inch, I had planned on moving mine back one inch but after install noted that it was not needed. If you mounted them the other way they would move your rear axle foreward one inch. HOwever the down side you lose 3/4 inch of lift in the process. Just thinking if you want them they will be cheep for you(free) just let me know. :):)
 
I a;ready have them, Doc. Thanks.
I was going to use them in the rear of the 62, but I'm not sure 1 inch is enough.
 
dbenke said:
I a;ready have them, Doc. Thanks.
I was going to use them in the rear of the 62, but I'm not sure 1 inch is enough.
Click to expand...

Great that means I don't have to go thru all that stuff looking for them. By the way keep your eyes open I've lost a holder of deep craftsman metric sockets. Don't know where they went. :)
 
FOR SALE:
PLEASE PM SO I DONT MISS A RESPONSE

third member from a 74
4:10's and a brand new aussie locker, installed in third but never installed in a vehicle, instruction manual included
Comes with stock spiders if you want to take back stock or sell the locker
Im not super well versed in 40's stuff but this is a course spline I think??? can someone confirm?

$250 plus the ride (cost of the aussie alone)

15x10'' black steel wheels-- mounted once and stored for last couple years

$150

18'' rigid mtn bike; Gary Fisher Tassajara
recently tuned and bunch of brand new parts and tires

$100

56cm Raleigh road bike
full 105 components, sti shifters, cinelli carbon fork

$400

Warn 8k winch
steel cable roller fairlead
works great just need a DD so trying to amass some funds

$500

FrontRunner Windcheetah full length roof rack
two bike fork mounts
two light mounts

$800/$750 without the bike/light mounts
 
Ryan, I've got a set of 2 1/2 in that are going on Scotts" 62. His still have a pretty good arch to them. You can have them if you want them, however I don't know when the swap is going to happen.
 
Free to a good home. 7 / 96 body with slight body damage on drivers side. Only body and a couple damaged doors. As of today it was / is completely stripped. Anyone interested i can get some pics for.
 
60 series taillight lenses from SOR for $18.00 a pair. I ordered 2 sets.
 
Free to David

John got you a freebe if you want it David, Laying just outside the shop is a whell housing brake lining for a heavy truck we are going to make a base for a big grinder out of ours and If you want the other one it will make a great base for any tool you want to mount and stay put: these things are heavy and about 20 inches in diameter and about 10 14 inches tall with lots of 3/4 inch mounting holes at the top of the bell. I bet they weigh 100 lbs each good solid base's :)
 
You must log in or register to reply here.

Share this page

Back
Top Bottom