Expedition Trailer Fort Myers, FL - Toyota FJ Cruiser Forum
Expedition Trailer for sale in Ft Myers FL....$800
Expedition Trailer for sale in Ft Myers FL....$800
For Sale/Wanted To Buy (10 Viewers)
- Thread starter ttahara
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
To bad the RTT isn't included
I have opportunity to test a prototype set of sliders for the LX470....at a much reduced rate over MSRP. Need to sell my new Slee sliders though to complete the process. I paid $900 for them and will let them go for $600 if interested. Let me know.
These fit all 100 series Land Cruisers.
SOLD!
These fit all 100 series Land Cruisers.
SOLD!
Last edited:
I think Keith might be interested in them for his Lexus up here. However he is back home in Texas for 1 1/2 weeks. If you can hold them for a day or 2 to let me get in touch with him I think he would be really interested.
Jeremy
Jeremy
Brand New Centerforce dual friction clutch for a Toyota 4Runner/Pickup 3.0L V6, part number is DF501110, it's $389 new from Jegs. Centerforce DF501110 Centerforce Dual Friction Clutches
Asking $250 plus shippping
Located in Beaufort, SC
Steven
Asking $250 plus shippping
Located in Beaufort, SC
Steven
Miele Appliances (New)
Anyone planning a kitchen remodel anytime soon?
I used to sell high-end applainces and design kitchens, and I bought some really trick Miele cooking stuff before I left. These were leftover year models that I got at cost plus an employee discount direct from Miele in NJ. I will sell at a really reduced price to get them out of my garage and help fund a vacation.
I can get pics, model #'s etc to anyone serious as they are a little buried at the moment.
Basically I have:
A premium 70cm black single wall oven Miele Stainless Steel Electric Convection Oven - eBay (item 280504142058 end time Sep-05-10 14:21:41 PDT) (like this only black)
Matching 70cm black warming drawer
a nice SS 34" (or maybe 36") wall chimney hood
I also have a nice matching 70cm steam oven that I want to keep, but if someone wanted to pay what I paid for it, I would let it go with the package. They sell new for $2000 and I think I paid $750 for it.
Also, if the chimney hood isn't what you are looking for, I have really trick 30" liner made by Vent-a-Hood that allows you to run a decorative hood out of wood, tile, stone, etc.
Similar pics:
Someone please buy this stuff so I don't have to do a kitchen remodel. I promise you will be happy with Miele, they build there stuff to last a lifetime.
Anyone planning a kitchen remodel anytime soon?
I used to sell high-end applainces and design kitchens, and I bought some really trick Miele cooking stuff before I left. These were leftover year models that I got at cost plus an employee discount direct from Miele in NJ. I will sell at a really reduced price to get them out of my garage and help fund a vacation.
I can get pics, model #'s etc to anyone serious as they are a little buried at the moment.
Basically I have:
A premium 70cm black single wall oven Miele Stainless Steel Electric Convection Oven - eBay (item 280504142058 end time Sep-05-10 14:21:41 PDT) (like this only black)
Matching 70cm black warming drawer
a nice SS 34" (or maybe 36") wall chimney hood
I also have a nice matching 70cm steam oven that I want to keep, but if someone wanted to pay what I paid for it, I would let it go with the package. They sell new for $2000 and I think I paid $750 for it.
Also, if the chimney hood isn't what you are looking for, I have really trick 30" liner made by Vent-a-Hood that allows you to run a decorative hood out of wood, tile, stone, etc.
Similar pics:
Someone please buy this stuff so I don't have to do a kitchen remodel.
I promise you will be happy with Miele, they build there stuff to last a lifetime.
- Joined
- Apr 21, 2005
- Threads
- 121
- Messages
- 558
- Location
- Charleston, SC
- Website
- www.charlestonwatertaxi.com
Random
Got a new rig and I have some stuff to get rid of!
1. Side steps for/from an ARB bull bar
2. Connfer roof rack
3. 33" General Grabber mud terrains on grey rims/ good tread.
4. Some random pig hoses and fans
5. Fj62 auto tranny parts and random fj60 parts, let me know if you need anything in particular
6. 2 gallons of durabak bed liner with rollers
7. Maybe a set of BFG 33x9.50r15s
Just make some reasonable offers and its yours! I am in Park Circle if you want to come look, please call me at 843.345.2629 or email Scott@charlestonwatertaxi.com. Thanks again.
Got a new rig and I have some stuff to get rid of!
1. Side steps for/from an ARB bull bar
2. Connfer roof rack
3. 33" General Grabber mud terrains on grey rims/ good tread.
4. Some random pig hoses and fans
5. Fj62 auto tranny parts and random fj60 parts, let me know if you need anything in particular
6. 2 gallons of durabak bed liner with rollers
7. Maybe a set of BFG 33x9.50r15s
Just make some reasonable offers and its yours! I am in Park Circle if you want to come look, please call me at 843.345.2629 or email Scott@charlestonwatertaxi.com. Thanks again.
Scott, what you want for the roof rack? Think it would fit my 80. thanks Jason
Side steps for/from an ARB bull bar
Interested.
Can u PM me a price?
Interested.
Can u PM me a price?
Bajarack dual jerry can mount
I need to sell or trade a dual can mount that I bought thinking I could mount in the 40 but didn't realize it is too big. I tried to cancel it, but they already shipped it out. Should be here this week. Does anyone have a single mount that they want to trade for this dual?
Or I will sell it for $95.
BajaRack Fuel Can Holer - Sierra Expeditions
Jeremy
I need to sell or trade a dual can mount that I bought thinking I could mount in the 40 but didn't realize it is too big. I tried to cancel it, but they already shipped it out. Should be here this week. Does anyone have a single mount that they want to trade for this dual?
Or I will sell it for $95.
BajaRack Fuel Can Holer - Sierra Expeditions
Jeremy
Redfish,
Is the roof rack still for sale?
Thanks
Is the roof rack still for sale?
Thanks
Think I saw your truck the other day in Park Circle. Looks good. I just moved up there last year.
I have the 3rd Row Seats from my LX470 (100 series) that I wont ever need. They are in OUTSTANDING condition and currently wrapped in plastic bags and sitting on top shelf in my garage. If anyone needs them just give me a yell by email or PM and make an offer. They are beige leather.
SHERMAN FJ62
Charlestons' King of Cruisers
I have 500 sqft of brazillian cherry hardwood floor that I am removing from my house. Pm with ph#. If you nail it down you could use it. G
I bought this cruiser about 4 years ago thinking I would have time to restore it. That hasn't happened other than a few weeks of cleaning and preserving what is there. My intentions were to restore it to the way it was when it rolled off the assembly line. As you will see by the massive amount of 55 parts I have collected for it over the past 4 years all it would take is to have someone do the body work on it, paint it and then put everything on. I consider that the easy part. Collecting the parts to do this over the past 4 years was the hard part.
What parts I have. (pretty much everything)
Front PTO with all the linkages
Stock OEM A/C I picked up from TLC
A couple sets of gutter chrome
All new weatherstripping for the tailgate
AU style brake light lenses
Rear quarter patch panels
spare early tailgate
Brass tailgate gear
Weatherstripping for all the doors
Metric TLC reproduction front seat upholstery. (The only one in existence)
Various plugs, grommets all oem all new etc...
Couple spare sets of hinges
Spare set of handle cranks
Dome lights
Tail lights
Reverse lights
Rear oem bumper
And a whole bunch of other things that have not been put on.
As far as the condition of the cruiser. It had sat in a garage unused for 20 years. It has some wear. I rebuilt the carb, replaced the plugs, plug wires, dizzy cap, points, radiator hoses, cleaned the radiator and flushed the motor, new oem water pump, new thermostat. Carb and smog pump were rebuilt by me. It has all the smog equipment on it. It has new oem vac lines. The t-case was replaced due to a crack with another 75 t-case that I rebuilt with quality parts. The gas tank was boiled lined and then coated with POR 15 on the outside. The front fenders were replaced. They are as mint as your going to find. No holes or rust. One has a slight ding in it. Front turn signals are 3 years old. All the glass is in good condition with no cracks. Weatherstripping around them is original with the chrome strips. It has all the original floor mats. Everything works on this cruiser. Lights, gauges, rear window was rebuilt and works. The engine starts and runs. It needs some tlc as it had been sitting for 20 years. The oil pan gasket was replaced. The clutch master and slave are new oem. The brake master is new oem. All the brake cylinders have been replaced along with pads and the rotors have been turned. It will stop just like it did when it was new. It has the OEM radio. It has a dash cover installed. The dash looks almost brand new. All the door panels are off and have been stored. The rear heater works
The cruiser has somewhere around 70k original miles. I've driven it maybe 30 miles in the past 4 years. Mostly around the neighborhood to keep the engine fresh. The tires have maybe 30 miles on the . They still have the nubs.
That being said it isn't without it's faults.
The exhaust from the tranny back needs to be replaced. It has rust in most of the usual places. Just not as much as most for it's age. Most all the rust has been treated and killed. The engine needs to be gone through. It runs needs a good going through.
My build is here if you would like to see what I started out with and what I have done with it.
https://forum.ih8mud.com/fj55-iron-pig-preservation-society/103681-fj55-my-stock-build-dd.html
As far as what I'll trade for it I have no idea. Throw some things out there. You never know what may stick. If I had to put a price on just the cruiser it wouldn't be more than 2k it's all the parts that come with it (PTO/, A/C, Weatherstripping, etc...) that make it valuable. If I had to sell it I'd think 4k would be a really fair price.
If I was back in SC, I'd snatch this up in a heartbeat! Always wanted a 55.
95 FJ80
95 FJ80 Land Cruiser with 33" BFG's, 3" Old Man Emu lift and bedliner a 1/4 the way up. Car has 221000 on it but the engine only has about 130,000 (I have this documented). It has leather. The power seats all work. I also have replacement parts for the seats just in case. The transmission was serviced less than a year ago. Runs and shifts really smooth. Has a few dings but overall looks good. NO rust on this thing. Has after market CD player. Powder coated wheels. NO Lockers $5200 I need to sell. I could ship probably anywhere in the US for $6200 total. Like I said, I really need to sell. Send me an email if you want more info or pics of anything. Or you can call or text at 865-804-2727 thanks Ben
UPDATE on the Cruiser. Just took it in to the Ralph Hayes Toyota dealer and had them fix the power steering leak replace the front crank seal, some o rings and general tune up stuff. All in all, dropped about $800. In light of this, my price is going to have to go up a little, $5400. I am willing to ship anywhere in the US for $6400. So, I am still taking a hit but really need to sell. This thing is running better than ever so, no worries about its mechanical shape. Shoot me emails, PM's or even call with interest or questions. thanks Ben
PS- I already got a quote to ship to New Mexico for $925 door to door so shipping will probably around the same anywhere.
95 FJ80 Land Cruiser with 33" BFG's, 3" Old Man Emu lift and bedliner a 1/4 the way up. Car has 221000 on it but the engine only has about 130,000 (I have this documented). It has leather. The power seats all work. I also have replacement parts for the seats just in case. The transmission was serviced less than a year ago. Runs and shifts really smooth. Has a few dings but overall looks good. NO rust on this thing. Has after market CD player. Powder coated wheels. NO Lockers $5200 I need to sell. I could ship probably anywhere in the US for $6200 total. Like I said, I really need to sell. Send me an email if you want more info or pics of anything. Or you can call or text at 865-804-2727 thanks Ben
UPDATE on the Cruiser. Just took it in to the Ralph Hayes Toyota dealer and had them fix the power steering leak replace the front crank seal, some o rings and general tune up stuff. All in all, dropped about $800. In light of this, my price is going to have to go up a little, $5400. I am willing to ship anywhere in the US for $6400. So, I am still taking a hit but really need to sell. This thing is running better than ever so, no worries about its mechanical shape. Shoot me emails, PM's or even call with interest or questions. thanks Ben
PS- I already got a quote to ship to New Mexico for $925 door to door so shipping will probably around the same anywhere.
Last edited:
I just wanted to post this for my neighbors to the south...I'm moving cross country and need to get rid of a few items before doing so. Parts are for a '72 FJ40 unless otherwise noted.
- Sun visors $45
- Bumperettes $45
- Front heater duct $35
- Charcoal canister $15
- Vacuum Switch Valve $15
- Spring perches (aftermarket) $10
- 4 leaf springs (still have great arch in them, but a bit of surface rust from sitting outside - year unknown) $50
- 6 NEW brake shoes $45
- Tow bar (for flat towing) $50
- 76 2F rocker shaft (minus one rocker) $30
- shock mounts $30
If interested, give me a call at 910-494-0621 or email @ pigpen4x4@yahoo.com
- Sun visors $45
- Bumperettes $45
- Front heater duct $35
- Charcoal canister $15
- Vacuum Switch Valve $15
- Spring perches (aftermarket) $10
- 4 leaf springs (still have great arch in them, but a bit of surface rust from sitting outside - year unknown) $50
- 6 NEW brake shoes $45
- Tow bar (for flat towing) $50
- 76 2F rocker shaft (minus one rocker) $30
- shock mounts $30
If interested, give me a call at 910-494-0621 or email @ pigpen4x4@yahoo.com
Trollhole, I want that 55. If only I did not sink all my money in my 60.
How about a nice rolex. Lol
How about a nice rolex. Lol
SHERMAN FJ62
Charlestons' King of Cruisers
TROLL
Hey if I did not get screwed over by my contractor uncle in-law and spent to much money on a stupid house I would be all over this. Looks like a good starting point.
Does the Fj55?
Hey if I did not get screwed over by my contractor uncle in-law and spent to much money on a stupid house I would be all over this. Looks like a good starting point.
Does the Fj55?
