NCFJ
Supporting Vendor
I need a gauge cluster for a 95 80 series. If the 96.97 are the same that will also work.
Pleas PM if you have one you wish to part with
Pleas PM if you have one you wish to part with
For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I’m looking for an FJ60/62 TOYOTA logo. Anyone got one laying around? Pm me if so. Doesn’t need to be in good condition. Looking for cheaper rather than higher quality. Thanks
NCFJ
Supporting Vendor
Anyone interested in a complete 1992 80 series cloth brown interior? Manual seats, all three rows. I have the truck, was going to swap it but plans have changed and I am using the chassis for another project. You can have the whole body if you like, it is straight, needs paint. I'll load it on your trailer for you.
PM me if interested with cell phone number, I will text photos.
PM me if interested with cell phone number, I will text photos.
JToobe
SILVER Star
Clarifying you are looking for the TOYOTA logo on the front grille? Note that the ones on the FJ60 are removable but on an FJ62 they are part of the grille....strange that it's different but it is what it is.
Post up on Old North State Cruisers For Sale/Wanted thread as well.
JToobe
SILVER Star
In need of one 33” 15 tire for a spare. AT or MT fine.
Also in need of working spare tire holder for 60/62.
Also in need of working spare tire holder for 60/62.
Josh, not sure if you found your vent bezel or not. Certainly not the most economical option but the whole register assembly appears to be part number 5565060050 according to parts catalogs.
@Twinair
One option straight from Dubai
. Not a terrible price but add roughly $10 for shipping.5565060050 Toyota REGISTER ASSY, INSTRUMENT PANEL, NO.1 Price: 39.52$, Weight: 0.136kg - PartSouq - Auto Parts Around the World
Hopefully not steering you in the wrong direction.
Inventory Reduction. Teenagers and cars and insurance costs abound.
Asking $6k
I must part with my 1997 FZJ80. Please pm and I will respond as soon as possible.
218k miles
The Good:
Triple locked. And they work
ARB front bumper
Weather tech floor mats
New oil pump cover gasket
New main crank seal
New dizzy o-ring
New belt molding
New valve cover gasket
New tie rod ends
New panhard bushings
New rear pinion seal
Newer tires with plenty of tread.
Specter off road seat covers
Clean SC title
No overheating issues
The bad:
Undiagnosed engine knock. Been running fine.
Superficial crack in cylinder head near valve cover that is seeping oil.
Send me a pm. Thanks
Asking $6k
I must part with my 1997 FZJ80. Please pm and I will respond as soon as possible.
218k miles
The Good:
Triple locked. And they work
ARB front bumper
Weather tech floor mats
New oil pump cover gasket
New main crank seal
New dizzy o-ring
New belt molding
New valve cover gasket
New tie rod ends
New panhard bushings
New rear pinion seal
Newer tires with plenty of tread.
Specter off road seat covers
Clean SC title
No overheating issues
The bad:
Undiagnosed engine knock. Been running fine.
Superficial crack in cylinder head near valve cover that is seeping oil.
Send me a pm. Thanks
Last edited:
I think the knock is from the timing chain gear on the cam being improperly installed by the shop I bought the truck from. They also probably put the crack in the head. Just a note it's a superficial crack. But still a crack. We tried to fill it twice with JB weld. I think it could be fixed.
JToobe
SILVER Star
Group buy on Roof Top Tents....seem to be a good price.
Insane RTT deal Group Buy....interest?
@dukmon , did you ever sell the one (Yakima I believe) you were trying to liquidate?
Insane RTT deal Group Buy....interest?
@dukmon , did you ever sell the one (Yakima I believe) you were trying to liquidate?
Damnit, I don't have anything that needs sliders right now.... I'm sure I can find something to bolt some onto.
Edit: wait the 40 needs some!
Thanks for sharing
Edit: wait the 40 needs some!
Thanks for sharing
Last edited:
At aldi's in .Easley...
Dometech c.f.-25 at bargain hunt on 123 where Kmart used to be. Good price! On aisle across from restroom.
You picked up one for everyone right?
I have a $50 gift card to ok4wd.com that I won from the GSMTR raffle. I have no plans to use it. Looking to get $25/beer/UC swag... whatever. Gift card expires 5/19/19
BenMara
Asian Redneck
1994 Toyota Landcruiser FZJ80
- 200k miles I6 4.5 1FZ-FE (still has some life as per LexTech)
- Green with clear pealing
- 325/85/16 XMLs(38") or 35" Not both Pic is with 35"
- Stock gearing
- No lockers
- Slee 6in springs
- OME shocks
- Slee adjustable panhards front and rear
- Slee sway bar extensions (sway bars removed) will be installed if needs be
- Slee front control arms
- Slee SS brake lines
- Opima yelow top
- ARB bull bar
- T-max 12,500 winch
- Stock Factory radio
- front speakers replaced
- Specter off-road camo seat covers
- remanufactured brake calipers w/ new pads
- New radiator, fanclutch,
- High output alt from sequia, new belts
- frontaxle has been rebuilt
- Rear IPOR bumper
- AC still blows cold
- no carpet, no headliner
- selling AS IS
$3k OBO
I have seen may TLCs do Tellico, NC with just offroad tires.
All this TLC needs is Rock sliders, regear diffs and lockers.
What was the price?
Looking for a 33-12.50-15. Doesn't have to be in good shape, just needs to hold air. The cheaper the better!
