For Sale / Wanted Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

chains

I have some brokem semi truck chains you could cut down and make into pretty much whatever size chain you need. I run a set cuto down to fit my 35/12.5 tire that I run on my cruiser. As the weeks progress I will have quite a few more. I will take inventory and see what I have lying around the shop. These are also the cam lock chains. No bungies required. I probably took about 500 pounds of chains to scrap last year and will probably do the same unless there is some interest. Free is a good price. I will send you a pm on where I am located. I am the service manager of a local trucking company and now that chain season is upon us there will be quite a few repairable ones to go around. ANYONE else?
 
Here is what i got. all things are obo. so make offers.

Rear axle cruiser/mini hybrid. 3.70 gears aussie locker. mitsubishi rear disc brakes. work awesome - $425 obo ready for bolt up for SOA!!! this could be a great axle for a 40 series if you are going with a centered rear output t-case or a great upgrade from a minitruck axle!!!

parting out FJ60 Landcruiser Front axle 3.70 gears open diff.
housing only $50
diff $50
axles $50 for both sides
knuckles (complete with high steer arms) $150 for both sides (trail gear high steer arms are drilled out for heim joints) SALE PENDING!!!

complete heim joint high steer set up 120 wall tubing. $75 obo (drag link, tie rod, and heims) SALE PENDING!!!

toyota double cardan complete driveshaft for the rear $140 obo SALE PENDING!!!
toyota double cardan high angle complete driveshaft for the front $155 SALE PENDING!!!

recently rebuilt SM465 new syncros and bearings $200 obo

NP205 t-case with Tom wood's 32 spline front and rear output flanges drilled for toyota double cardans all new seals! $350obo (Flanges alone are $125 each)

toyota 4-runner front seats (grey cloth) great upgrade from the stock 60 series! comes with brackets! $135 obo.

3" pinnacle leaf springs for a 60 series 3-4 years old. $250 obo SALE PENDING!!!

Misc landcruiser driveshaft parts $20 for all parts

Misc toyota pick-up driveshaft parts $30 for all 3 parts

12" aux fan $20

This was my DD until 12-17-08 and it is all in great working order.

Tony
719-339-8933
 
Last edited:
WTT: My Blues for Your Rubber (FZJ80 Arms)

I recently installed Slee's blue caster bushings in my 80 series front radius arms using the Landtank template (MUD), which aligns the bushings to rotate the axle around the centerline. I don't have quite enough correction for a DC shaft at my lift height, so I'm looking to trade arms with another 80 owner who was/is lifting and wants to run the bushings for CC correction.

These run ~$125 plus install, so will save you some coin. I'm going CC plates and need stock rubber bushings. Lower mileage preferred.

Any interest? I figure we would just meet and do the swap on site.

Thanks :cheers:
 
Trade Winch Warn XD9000-I

I have a Warn XD9000-I Winch with Integrated Relays above the spool.. This Winch was won at Cruise Moab Maybe 2005 or 2006.. The Guy who won it could not use it with his Bumper, so i bought it from him.. I have used it less than 10 times total.. The Cable is in good shape, and i always took good care of it, Never ran it for long pulls..

warn-xd9000.jpg

attachment.php


I want to Trade for a Similar winch without the Integrated Relay's.. I think i am having some Overheating issues because of how its mounted blocking air flow to my Grill.. I cant Lower it due to the Saginaw PS..

So If you have a similar winch with a separate Relay/Solenoid Pack i would be interested in trading..
 
Nay said:
I recently installed Slee's blue caster bushings in my 80 series front radius arms using the Landtank template (MUD), which aligns the bushings to rotate the axle around the centerline. I don't have quite enough correction for a DC shaft at my lift height, so I'm looking to trade arms with another 80 owner who was/is lifting and wants to run the bushings for CC correction.

These run ~$125 plus install, so will save you some coin. I'm going CC plates and need stock rubber bushings. Lower mileage preferred.

Any interest? I figure we would just meet and do the swap on site.

Thanks :cheers:
Click to expand...

How do these compare to the ones that come with the OME 2" kit? My castor is marginal according to the rack @ firestone and it doesn't track as well as it did pre-lift. It's not really an issue now, but I may put in spring spacers soon to level it up. I have an extra set of arms here with stock bushings. Came off a 93 with about 160K miles.
 
4" Alcan lift for FJ60
Coming off my 87' FJ60.

4" Alcan springs with bushings and shocks for an 87 FJ60. These springs only have 50 miles on them. I bought the 60 from a guy who works on a Xmas tree farm. These were only used to drive around the farm for a couple weeks, and then it was sold to me and driven 10mi to my house.

I think they sell for around $400+ a pair. My price is $650 for all four with bushings and four newer Skyjacker shocks to match the lift. The kicker is that you need to give me your stock, RUST FREE leaf springs in return.

Needs to be a local sale unless you want to pay shipping both ways.

Located in Windsor, CO (near Fort Collins)

970-420-4198
 
FJ60 W/RamJet 350

This Message came to me through the CLC Mail System

I live in Washington (the state). My son has had my 1984 FJ60 in Boulder while attending CU. It’s been a great vehicle for college and getting him to the slopes. He graduated in December and now wants to buy his own new car. Rather than ship the FJ60 back to Washington to sell it, thought I’d sell it locally in Colorado. Wondering if you have a forum to sell cruisers on? Pictures attached. We put in a 350V8 Ramjet and OME lift kit on it. Runs good. 4x4 works fine. New tires. WA title is free and clear. I have more pictures and a list of all the improvements if requested. Any suggestions as to where to advertise this would be helpful. Thank you for any help. – Rob Bernardi (503)-209-0735


Price is $8,000 OBO, if your interested give him a call!
LC Engine 3.webp
sideshot.webp
 
Last edited:
Toyota Bed

Hey Guy's, I have the bed from my 1980 mini. It's in good shape. Some rust, but no rust holes and a little body damage. $500.00 OBO. I can't get the pics to upload but I can email them to you.

Charlie
719-433-5257
 
FZJ 80 Rear Axle Shafts

Ive got a set of FZJ80 Rear shafts, need to clean out the garage..

Make an offer!

These are Non Locked, so they dont have the Long Spline section on the short side, but i think they should work in an emergency but you will not be able to unlock the Diff.

Trevor
 
You must log in or register to reply here.

Share this page

Back
Top Bottom