Flipping your quadrajet

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2005
Threads
32
Messages
153
Anyone done this? I Went rockcrawling with a friend with a pretty tricked out 70 Bronco and when I looked under his hood he was running a quadrajet on his 302 but it was rotated 180 on the manifold. he swears its the next best thing to fuel injection on the really steep stuff. I love quadrajets in general and was thinking of doing this on my cruiser, just need to lengthen the accel cable and fuel line feed. I'd like opinions from people who have done this and if they think it's worth it, pros/cons. Thanks
 
WTF!

You obviously have NEVER seen the inside of a Q-Jet.
 
I have a Q-jet on my 351w. Square bore intake w/ the adaptor installed upsidedown. I had to do a little grinding on the adpter to make the butterflys open all the way but it works great.
I have always heard that w/ a q-jet they will stall an extreme uphill angles but if you turn them around they will stall at extreme downhill angles. I havent had any problems with mine stalling at any angle so I have just left mine alone.
 
71-CRUISER said:
I havent had any problems with mine stalling at any angle so I have just left mine alone.

Thats the same way with mine. I've noticed that the fuel pump makes a big difference. I run a Holley highflow 80gpm mech pump and the one time I had to swap it out with some cheapo, it sucked. Couldn't get the nose end up more than a few feet before it starved. Other than that I have run my q-jet straight out of the box and it has never failed me. Been on my side a few times too :D
 
hey thanks for the replies, I'll probably leave mine alone too unless any one else wants to chime in. Mine runs great as is but i thought this might be useful as I get into more radical situations.
 
Back
Top Bottom