FJ62 Raffle-Donation to Rescue Tellico Fund

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

"The CottonLand Cruisers will be donating the belts and hoses. Just let us know where to send them.

Thanks!"



Thank you to all you "Cotton Land" members :beer::beer::beer:.
Shipping address:

Georgia Cruisers 4wd Club c/o Domega Corp.
180 Allen Rd., Suite 104-S
Atlanta, GA 30328
 
Furthermore, it was won by a "local" Josh (who posted up early in this thead) in SC.
Click to expand...

Not to split hairs Heather but Josh lives in NC :grinpimp::doh:
 
So the old trans and case had about completely destroyed the splines on the trans output shaft and gear so we weren't able to get everything reassembled on Saturday. No big deal because the shaft on the new trans was perfect so all we had to do was give Toyota a call and we had a new $200 gear by Wednesday. Either way I got everything reassembled last night and it is all ready to go back in the 62.

Also a big thanks to Ben for donating the rebuild kit as well as his time on Saturday to help with the disassembley and cleaning.
DSC06805.webp
DSC06806.webp
DSC06809.webp
 
k9crazy said:
Following up with Ted's post, below is a list of parts that we know we will need for the 62. This list will change and grow as we get more into the project, I am sure. But, here is where we will keep the needs, wants and haves. If you would like to donate part that are on the list, please contact us at FJ62@gacruisers.com.

We intend on keeping this a family friendly mild wheeler.

NEEDS:

ENGINE PARTS:
Intake Hoses
Engine Gasket Set
Radiator
Water Pump
Radiator Cap
Coolant
Cap, Rotor, Plugs, Wires
Oil and Filter
Fuel Filter
Air Filter
Fuseable link

FRONT AXLE AND BRAKES:
Rebuild Kit / gaskets
Wheel Bearings
Calipers
Brake Pads
Front Rotors
Front Brake Hoses
Rear Wheal Cylinders
Brake Shoes
Brake Hardware
Rear Brake Hose
Rear Gear Oil

OTHER:
Windshield
Rebuilt Transmission A440 (It's rebuilt and here...now we just need to pay for it)

rear wiper arm
seat covers/upholstery
rubber for front side marker lights, R and L
turn signal shroud (silver) for both front turn signals
front turn signal lenses and rubber
front bumper
rear bumper
rear headrests
dimmer switch on dash to the left of the steering wheel
rear passenger ashtray
front passenger wiper arm cover
suspension (springs, shackles, pins, shocks, etc.) - stock or minimal lift
inner/outer trim rubber for doors where the windows slide through
radio antenna
transmission skid plate
windshield
front valence


WANTS:

winch bumper (instead of stock bumper)
first aid kit
other safety items
heavy duty rear bumper (instead of stock bumper)--donation arranged, if it can be modified to fit (LC Hamma). If someone has a 60 Series specific bumper that they will donate, that would be preferable.

HAVES:


Hoses and belts -- (donation arranged - Cottonland Cruisers)
T-Case Rebuild Kit --(donation arranged - Ben Garcia)
PS Pump --(donation arranged - Rick Arflin at RALPH HAYES TOYOTA)
thermostat (new in box) --(donation arranged - boombapslappy)
synthetic winch cable --(donation arranged - k9crazy)
winch and cable--(donation arranged - Olde North State Cruisers)
tires (33X15.50X15) - (donation arranged - BFGoodrich)
New battery cables (donation arranged - Urban LandCruisers)
fairlead--donation arranged (ArmyTaco)
battery--donation arranged (J. Treadway)
tow strap--donation arranged (Offroad Outfitters)
Rock Sliders--donation arranged (Rock Solid Offroad, Denver CO)
tree saver--donation arranged (Offroad Outfitters)
fire extinguisher--donation arranged (lt1fire)
"High Jack lift"--donation arranged (AuburnFJSexy & TrailDiva)

And of course, we will take MONEYif that is what you would like to do. All funds will be put into the truck and all proceeds will go to SFWDA's Rescue Tellico.
Click to expand...


When you need the rear passenger door, give me a shout since I don't make your meetings. Plus I have been out of town most of this past month so I may have missed a previous request.

Also, the support for and focus on this project appears to be in great shape. Congratulations.
 
Michael, Brian--You guys rock! Thanks for all the help and a hand to Ben as well. We're really looking forward to getting going on this truck to add the "bling" factor.

Larry-Work has kept me busy as well so I've not been able to give this the attention it needs the last few weeks. I'll certainly let you know about the door in the very near future.
 
If I can gather up some extra cash I will try and help out with some of the smaller things or just send it to yall and yall do what you need with it. I loved Tellico. Only been once the first time I met the Ga Cruisers and fell in love with the place. Was hoping for the Spring ride but never opened..I hope ll this helps gets this place back open.

That is if I ever get my piece of purple glass:rolleyes:;)
 
Last edited:
We got about 4 1/2 months.
Not trying to be a ball buster here, but what's the status of the rig. When is it going to be moved? when is the next wrenching session? what's the schedule?
:beer:.
 
BGarcia88FJ62 said:
We got about 4 1/2 months.
Not trying to be a ball buster here, but what's the status of the rig. When is it going to be moved? when is the next wrenching session? what's the schedule?
:beer:.
Click to expand...

UPDATE: 7/30/09

Talked to Brian today, the last replacement parts are all in and due to be installed early next week. Once that is complete we'll have a drivable truck and then ready for the body shop. Josh has about 4 dates set aside already stretching into October for build days but I'll let him provide the details for that.

For those who have pledged parts, Thank you so much for the contributions and support!!!! I will be in touch very shortly in hopes of getting these parts delivered ASAP. If anyone has any questions about where to send please let me know.
 
Belts and hoses are being donated by the "CottonLand Cruisers"
should be here this week.

Can't Thank you guys enough many :beer:'s to ya see ya'll in October.
 
Im going to work on it right now. It should be running and driving by the end of the day.
 
Looking good. I only have fj60 parts lying around. If there is anything that you can use off of a 2F let me know. If the rear bumper you have does not pan out, I have a very nice stock rear.
 
4:57 and I just got back from a quick Test Drive and everything seems to be good to go. We can give it back to you guys tomorrow at the GA Cruiser Meeting if you would like to move it on to Phase II.
 
71-CRUISER said:
4:57 and I just got back from a quick Test Drive and everything seems to be good to go. We can give it back to you guys tomorrow at the GA Cruiser Meeting if you would like to move it on to Phase II.
Click to expand...

Thanks Michael,

I'm working on getting it temporarily insured so I can drive it back to my house this evening The body shop is very near my house so it makes sense to work it this way. I'll be in touch before the end of business.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom