FJ43?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

If you have all the parts adding a heater would not be that hard. Hardest part would be grafting in the section for the blower. The cable broken for the hand brake would not bother me as much a the broken ear on the transmission. That will require locating another transmission or housing at the least. Rust is even worse. All the other issue are bolt on parts. Are you planning exporting it out of the area where heat is needed?
 
1975304
 
Are you planning exporting it out of the area where heat is needed?

Good question. If I bought it then I would likely want to take it back to the US in 2 years or so when I relocate. I am actually more interested in this Troopy: Middle of nowhere FJ45 Troopy

Again, I have some colleagues trying to connect with the owner. If I buy the Troopy then I will likely try to send it down to Seb Sports in Dubai to do a frame off. I was in their shop a couple of weeks ago and they are doing some pretty amazing work.

My next door neighbor saw the FJ43 and mentioned it to me. If it was a 40 then I would likely not be interested at all but a factory soft-top 43 would be of interest. I never thought about the no heater though until you mentioned it. Thanks again for all the very helpful information.
 
Good question. If I bought it then I would likely want to take it back to the US in 2 years or so when I relocate. I am actually more interested in this Troopy: Middle of nowhere FJ45 Troopy

Again, I have some colleagues trying to connect with the owner. If I buy the Troopy then I will likely try to send it down to Seb Sports in Dubai to do a frame off. I was in their shop a couple of weeks ago and they are doing some pretty amazing work.

My next door neighbor saw the FJ43 and mentioned it to me. If it was a 40 then I would likely not be interested at all but a factory soft-top 43 would be of interest. I never thought about the no heater though until you mentioned it. Thanks again for all the very helpful information.


I remember that troopy thread, I posted in it. Did you ever figure the production date? 10/82+ with a insert dash and transmission hump is made to except a H55F five speed with no mods other than the inspection cover depending which cover and shifters.

That 43 would be a good deal if you could get it cheap enough. But I looking at it having all the parts needed to restore. Wish I could find one like this local to me.
 
No I have been advised by my colleagues to let them try to work a deal on it before I go near it again. If they find out a westerner wants it the price will go up considerably. Also need to make sure I can register it. Unfortunately with Ramadan going full swing it might be early June before I can get further information. It takes a lot of patience over here when you don't speak the lingo.
 
Good advice from your colleagues. If you can get a good deal on it please buy it and the Troopy and any other nice 43s that you find while you’re there! Myself and likely others that have posted here, @RAGINGMATT, @Living in the Past, may be willing to take one or two off your hands should you not want to keep them all😎
 
the leaf spring packs in the rear have like 8-10 Leafs

it rides smooth enough for me , but NOT the wife , she applies the Death Grip to the SOR Grab bar at all times :)
 
@RAGINGMATT - you have a very nice example of a FJ43 from Colombia. My wife feels the same as to the ride.😱

@Living in the Past - the ride is better than a 40, but it will depend on what springs are on the truck. If aftermarket springs such as OME, the ride may be harsher because the spring rates are very high, particularly in the rear. The rear springs are the same as FJ45s and most aftermarket brands use spring rates designed to haul some seriously heavy weight. @lcwizard is incredibly knowledgeable on the subject and has some good posts on spring rates
 
the leaf spring packs in the rear have like 8-10 Leafs

it rides smooth enough for me , but NOT the wife , she applies the Death Grip to the SOR Grab bar at all times :)


When I was lucky enough to have a 84 HJ47RV end up in a wrecking yard locally one of the things I did get off of it was the rear spring packs to possibly use in my FJ45. I know they are a little wider but these just don't show up here. If I don't end up using them I wasted a few bucks. Decide I want them later would be too late. It's long gone already.

@RAGINGMATT - you have a very nice example of a FJ43 from Colombia. My wife feels the same as to the ride.😱

@Living in the Past - the ride is better than a 40, but it will depend on what springs are on the truck. If aftermarket springs such as OME, the ride may be harsher because the spring rates are very high, particularly in the rear. The rear springs are the same as FJ45s and most aftermarket brands use spring rates designed to haul some seriously heavy weight. @lcwizard is incredibly knowledgeable on the subject and has some good posts on spring rates

Dave would be a good one about spring rates. My 45 currently coil springs over the rear shocks. Ride is really nice. Just liked having the option of heavier springs available for cheap if I decide I need them. That was a really nice 84 troopy that got wrecked. The PTO winch got destroyed but the PTO and driveshaft survived. Those seem to be hard to find in any market. Look at this 43 and think I would have split case and hand brake on the rear axle since I already have one. Probably a H42 verses a H41. 3.70:1 diff gears. What to run hard trails the SWB is a better option with the better rear departure. What I would use a mid wheel base for the 60 series gearing would be fine.
 
So a colleague finally got in touch with the owner for me. He wants 15k SAR ($4k). Although that sounds like a "deal", I'm pretty sure for 20k SAR you can get one that is drivable. I just wanted to pass that along as a reference. I'm sure with some discussion, especially about the broken transmission casing that I could get it for 10k (~$2700).

For now I'm going to concentrate on the Troopy. I need to get a price established and then I can inspect it closer. I know that sounds a little backwards but that's how things go over here sometimes.

I also just purchased a '77 55 back in the US. Very excited about that one. Unfortunately I won't get to lay hands on it until July when I'm back in the US again.
 
Should you decide to send a container back to the US and have room for the 43, I could make it worthwhile for you, I have an extra transmission and soft top in my stash.
 
Thanks. I can only own two cars as an expat. Thankfully my company 200 series doesn’t count. I will probably ship two home in a container. Not sure I want to get into the business of buying and exporting while i’m here but who knows. It might not be that difficult.
 
I like 43's a lot, can't judge good enough by the limited pictures but maybe in this case I would go for that LHD LX


:cheers:
 
I like 43's a lot, can't judge good enough by the limited pictures but maybe in this case I would go for that LHD LX


:cheers:


As much as I would like a mid wheel base. The amount of rust makes a bigger project than I want to take on. The 84 LX petrol is another matter. I do find it interesting is appears to have a four speed and not a five speed. Would thought all 83/84 LX models would have had the five speed.
 
Last edited:
I think the FJ43 is worth $2,700 depending on how much it takes.to get it to US. I too have spare transmission and would probably update to a H2 and split transfer case. Probably even a hand brake on the rear axle but that because I have everything except the cable for a mid wheel base hand brake. What I don't have is time to take on a another project that needs that kind of rust repair.
The LX having A/C is a plus. Really the one thing that has to be on from the factory do do it right. Having a heater is also a plus.
Hardest part of a five speed is finding the correct 40 series top cover. It's ashame the floor made is cut for a four speed. I think I may know of a way to shift the transfer lever forward and still have the correct lever. Looking I can see the shift pattern on the glovebox door and clearly a four speed. Find that strange. Also that it doesn't have the later style knob on the glovebox box door. The door pulls and window cranks were originally brown. I also believe for 84 the door pulls were hard plastic. I can find a listing for door pull 11/83-10/84 in brown and four speed. Still for $15K depending on cost to get it probably a good deal. Would probably use my five speed and factory PTO winch on this rather my plan for my 79. Not.neimg able to do personal I section to see what your all dealing with it tough. Had my 79 since 1997 and know what all needs to be done.
 
Back
Top Bottom