Wanted FJ40 REAR DRIVE SHAFT, '74-84

[CPOV]

Location

United States

Looking for a complete (including u-joints and yoke flanges) rear drive shaft from a 74-84 FJ40. The yoke flange bolthole measurements are: 60x68.5mm and 11mm bolt hole diameter. I live in Northern California-Sacramento Area. PM if you've got one you're willing to part with along with condition and price.

Thanks,

CP

 

[3_puppies]

CP, an 81-84 driveshaft will be longer than the earlier 74-80 driveshaft. It will not work in an earlier stock 4 speed application.
Paul

 

[CPOV]

Not worried about length as the shafts are getting modified, thanks for the heads up though. Really only concerned with the yoke flange bolt dimensions of 60 x 68.5mm and 11 mm diameter bolts.
CP

 

[cullen]

I have one from a 75, I will send you pictures in the morning

 

[cullen]

here are the pictures, this is off a 75, I really don't have an accurate way of measuring these. See pictures below,


[url=https://flic.kr/p/JRHrGf]
[url=https://flic.kr/p/JKx1Wq] https://flic.kr/p/JKx1Wq[/url][/url]

 

[CPOV]

Hello,

Thanks for responding, how much do you want, plus shipping?

Destination: Orangevale. CA 95662

If you could measure the yoke flanges as shown below and just make sure its 60mm x 68.5mm (2-3/8" x 2-11/16"), it's a '75 so it should be.

Cooper

 

[Crusierman45]

Hello,

Thanks for responding, how much do you want, plus shipping?

Destination: Orangevale. CA 95662

If you could measure the yoke flanges as shown below and just make sure its 60mm x 68.5mm (2-3/8" x 2-11/16"), it's a '75 so it should be.

View attachment 1287711


Cooper

Hey located 20min east of Modesto. I've got one.

 

[cullen]

Hey Cooper I sent you a PM with the details

 

[CPOV]

Got one, thanks guys.