FJ 40 Mechanic

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Watch it Brian,,,my home town..lol :rofl:
Not much for Landcruiser specific mechanics here in Delaware. Best try to find an old school mechanic which there are few of anymore.
What are you looking to have done? I'm just N/W of Dover.
 
Power steering upgrade...maybe disc brake conversion. I have FJ 40 and 45. The 45 is all done already. Thanks

thumbnail_IMG_6588.webp


s-l1600 (1).webp
 
That's kinda out in the sticks.
Not really...five minutes from Lewes and Rehoboth. Had to escape the oppressive real estate taxes of New Jersey. It's beautiful down here...ten acres less than a mile to beach. Great people.
 
Those trucks are too nice to be on the East Coast! What type of steering conversion are you looking to do?

Not all that close to you but I had John Palita in Kennet Square, PA do some fabrication work/ saginaw power steering for me. He mostly focuses on old-school (and new) Land Rovers but he did decent work on my FJ40 a couple years back. It did take him a while to get to it, but the end product was good.

PS - I grew up in Northern DE and am down in Middletown on a pretty regular basis (family down there). Haven't taken the FJ40 as far south as Milton yet.

Not really...five minutes from Lewes and Rehoboth. Had to escape the oppressive real estate taxes of New Jersey. It's beautiful down here...ten acres less than a mile to beach. Great people.

Furthermore - I hear you on that. My grandparents have 13 acres in East Millstone, NJ - family farm. Won't be staying in the family anymore after 300 years because the taxes are un-affordable. Something to the tune of $26k a year, even after farm allowance on the majority of the acreage.
 
Last edited:
Those trucks are too nice to be on the East Coast! What type of steering conversion are you looking to do?

Not all that close to you but I had John Palita in Kennet Square, PA do some fabrication work/ saginaw power steering for me. He mostly focuses on old-school (and new) Land Rovers but he did decent work on my FJ40 a couple years back. It did take him a while to get to it, but the end product was good.

PS - I grew up in Northern DE and am down in Middletown on a pretty regular basis (family down there). Haven't taken the FJ40 as far south as Milton yet.



Furthermore - I hear you on that. My grandparents have 13 acres in East Millstone, NJ - family farm. Won't be staying in the family anymore after 300 years because the taxes are un-affordable. Something to the tune of $26k a year, even after farm allowance on the majority of the acreage.
I was thinking the stock conversion that they sell on E-Bay. The drum brakes actually aren't that bad - I'm not breaking any speed records. Getting to taxes I pay 21K up in northeastern NJ...I have five acres and a nice house...but 21K is outrageous. My neighbors pay 28-30K - I fought them the past 20 years that's why mine are lower. Where is it going...NJ Pension System/Politicians(aka Crooks). I built a 40x60 pole barn with a lift just haven't installed electric yet. My next door neighbor moved from Maryland.
 
I was thinking the stock conversion that they sell on E-Bay. The drum brakes actually aren't that bad - I'm not breaking any speed records. Getting to taxes I pay 21K up in northeastern NJ...I have five acres and a nice house...but 21K is outrageous. My neighbors pay 28-30K - I fought them the past 20 years that's why mine are lower. Where is it going...NJ Pension System/Politicians(aka Crooks). I built a 40x60 pole barn with a lift just haven't installed electric yet. My next door neighbor moved from Maryland.

I live in one of the last (relatively) low-tax counties in MD. The trade-off is bad schools and no infastructure. Unfortunately they "double tapped" me last year, re-assessed my house at a value I could never hope to sell it for, and also raised county property taxes - so my tax bill went up $700 overnight. I fought it with the county for months, provided comparable properties with lower tax burdens, etc. and they basically told me "tough luck, we're not changing it."

Delaware is great from a tax perspective - but unfortunately has become a refugee state for folks like you and New Yorkers - who, inexplicably, are working hard to make sure the same laws and taxes that forced them to flee NJ/NY are enforced in DE. Sounds like you're not on that side of the equation!

Taxes/Politics aside - and back to tech: Drum brakes are OK - I had mine pretty well adjusted, (after a bad adjustment had me jacknife at a yellow light right after I bought it) and they could lock up all 4 wheels and stop the truck quickly when I needed them to - but I've since converted to 4-wheel discs, and the difference is substantial. Your rigs are too pretty to wheel, I'd wager - but off-road, the disc brakes are a huge step up as they don't fade when they get wet. Plus, it's nice to be able to "set it and forget it" and not worry about constantly tweaking them.

If I had my choice I'd have done a mini-truck or FJ60 power steering conversion (stock is nice, but hard to come by, and tough to find rebuild kits for). However, my truck came to me with a (very badly done) saginaw steering conversion. Since the frame was already cut up for it, it made more sense stay that route and just clean it up.
 
Has anyone had any luck with an FJ40 mechanic in slower lower Delaware? I've a 1972 that needs some attention in live in the Rehoboth area. @jacquesdemolay that 45 is so nice!

I'm just north of Dover. By no means a mechanic but I know my way around these a little and you can get just about any answer from the Mud experts.
What issues do are you having? Jeff
 
I've a 1972 that needs some attention
Welcome to 'Mud. Double flipoff, sorry, traditional.
This thread is kind of old. Maybe should have started anew. Also, this is 'Mud. We do a lot better telling people how to do something to their rig than where to have work done for them.
Perhaps if you tell us what kind of attention your 72 40 needs, we could tell you how to do it. And with competent Cruiserheads in your area to assist, you could do and learn.
Saves money, makes you a better owner, everybody wins.
 
Thanks guys. Usual issues from what I’ve gathered (lots of lurking here since September!). A LOT of time spent bleeding brakes but still pedal to floor without much purchase. Carb - I’ve followed the set-up guides but not much luck (runs only with choke closed). Clutch - Can’t get into gear/won’t come out of gear (thinking sticky pressure plate as master/slave seem OK?). I think I’ve read most threads on these topics and need help!
 
Yep, the usual stuff. Pick one, i might start with brakes, start a thread.
Heck, pick two, start two threads.
 
A lot of people from the east coast just sends their vehicle to a restorer and / or qualified mechanic somewhere else in USA to perform all the work needed, and just pay the price.
 
Back
Top Bottom