Wanted Electronic Dizzy, Igniter & Coil Setup

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

tglaser

tglaser

10 Year 15 Year
Joined
Jul 25, 2007
Threads
27
Messages
173
Location
El otro lado
Location
United States
Looking for electronic distributor, coil and igniter setup for my 1F 1969 FJ40.

Had a set from a '78 2F installed - worn out and need another.

Want to keep it Toyota, so please contact me if you have one in good working condition from a '78 or newer 2F engine. Either PM here or text at (512) 757 - one six six four. Thanks.
 
I've got a later 2F setup from a 60 series, dented side cover, distributor and coil/ignitor combo.
 
I've a recently removed '78 dizzy igniter and coil that worked fine up until a week ago, when pulled to swap in a Jim C unit, as part of a comprehensive rehabilitation plan.

I'm running a 60 big cap on a '76 2F (that I bought from Paul a several years ago) and, although it cannot be solely attributed to the recurved dizzy, it chits and gits.....stated honestly and I fairness to Paul's solicitation.

Addicts know better than to cut in on a dealer's business, and Paul has played a substantial role in supplying, so don't want to take food off his table.....I'm just tired of inventory.
 
Delancy said:
I've a recently removed '78 dizzy igniter and coil that worked fine up until a week ago, when pulled to swap in a Jim C unit, as part of a comprehensive rehabilitation plan.

I'm running a 60 big cap on a '76 2F (that I bought from Paul a several years ago) and, although it cannot be solely attributed to the recurved dizzy, it chits and gits.....stated honestly and I fairness to Paul's solicitation.

Addicts know better than to cut in on a dealer's business, and Paul has played a substantial role in supplying, so don't want to take food off his table.....I'm just tired of inventory.
Click to expand...


thanks Delancy - and no worries, I'd love to have a Jim C setup but can't seem to stand in line that long. Surely a testament to his product.

Please send pictures of your parts and a price to either my cell (512) 757 sixteen sixty-four, or to my email at tglaser2 at gmail
 
Bumping this back up.

Would still like to find a dizzy assembly like the one pictured below, but in good working condition. Let me know what you have. Thanks.

image.webp


image.webp
 
I've got the distributor from my '78 that worked fine when removed and swapped for Jim C'd unit a week or so ago.

Paid $100 plus shipping for the unit I sent to Jim that was in same condition.

Make me an offer on the dizzy I removed and let's close this thread.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom