ebrake on rear disks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 3, 2006
Threads
143
Messages
1,810
Location
Everett, WA
Website
www.torfab.com
I installed the eldorado calipers on my '69 fj40, and just finished installing the e-brake cables. I have it all wired up, and tight, but it's very difficult to pull the brake lever, and the e-brakes still don't engage.

Does anyone know any tricks I can use to improve the e-brakes? Besides just adjusting them, which I've already done...
 
Is it a cable that runs back there to the calipers? Does it have many or sharp bends? maybe just a guess.
 
Yeah, they're cables that run right to the rear calipers. I bought minitruck e-brake setup, and the eldorado e-brake setup, then joined it in the middle. I ran the cables on the frame rails, so they're running really straight.

My problem might be that I don't have enough mechanical advantage from the e-brake lever to engage the calipers hard enough to stop the wheels.
 
Last edited:
torslinning said:
My problem might be that I don't have enough mechanical advantage from the e-brake lever to engage the calipers hard enough to stop the wheels.

Zactly what I was thinking. When you pull the e-brake lever out, does it a) come all the way out, or b) is it tight with a short throw? If 'b', then you could add a lever of some kind instead of joining the cables directly together. I'm thinking of an 'L' shape with the long side connected to the lever and the short side connected to the brakes. What a PITA though.
 
Welcome.



The stock ebrake levers in a Land Cruiser, both the under the dash style and the later floor mount, do not provide enough travel or leverage to positivly engage the parking brake....


I have been drawing a few things up about increasing the leverage the stock lever set up can provide to the system but do not have anything put together to test yet...and they are just junk paper sketches...



You need a larger lever! :)


Good luck!

-Steve
 
pics...

DSC01991.webp

DSC01994.webp
DSC01991.webp
DSC01994.webp
 
I have been reading on the net for years how no one seems to be able to get the eldo parking brake calipers (parking brake) to work worth a damn. Is this because the parking brake portion sucks or could it be no one has figured out how to engage them with enough force to make them clamp down enough? Hmm...
 
Poser said:
Welcome.



The stock ebrake levers in a Land Cruiser, both the under the dash style and the later floor mount, do not provide enough travel or leverage to positivly engage the parking brake....


I have been drawing a few things up about increasing the leverage the stock lever set up can provide to the system but do not have anything put together to test yet...and they are just junk paper sketches...



You need a larger lever! :)


Good luck!

-Steve

might be convoluted, but could you use a small 2 pully system to increase leverage generated from the handle?
 
John Smith said:
I have been reading on the net for years how no one seems to be able to get the eldo parking brake calipers (parking brake) to work worth a damn. Is this because the parking brake portion sucks or could it be no one has figured out how to engage them with enough force to make them clamp down enough? Hmm...



It needs more travel than the stock Land Cruiser parking brake levers can supply....look at a parking brake pedal assembly on line....google it and read away....you will find many situations where people have grafted in a foot pedal to make the eldo parking brake set up work on street rods and such.


:beer:
 
I have been working on a floor ebrake pedal for about a year. The problem is, not enough room around the clutch brake pedals to install another lever. my mockup is to the right of the gas pedal along side the heater above the tranny hump. Kind of difficult to get to, (have long legs). It definately is not an EMERGENCY BRAKE, But when I have test fitted the foot lever it does hold the pads tight. Long way to go before can be properly installed in the 40. Hopefully an article in TT in the future.
 
Back
Top Bottom