The two bucket wash method of course
The 2nd bucket was dumped and put back up. It only gets XM360'd once a year (waxed a few times a year). ALSO the buckets do have the grit guards in the bottom of them too in case you're all wondering
Early pickup/hilux and 4-runner tech and classifieds
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The 2nd bucket was dumped and put back up. It only gets XM360'd once a year (waxed a few times a year). ALSO the buckets do have the grit guards in the bottom of them too in case you're all wondering
- Thread starter
- #764
There was a lot of gritty mud on it I needed to rub around my clear coat.
Your supposed to spray it off with the high pressure sprayer. Says so right on the brick wall. Ive washed my 200 maybe 3 times so it looks good from a far but far from good. Hard to see dirt on silver.
^^I did the same, but I have an unusually stubborn pile of bird poop on the hood that will require the high pressure spray or the brush.
Looks real similar to the leveling kit on my truck. OBTW my truck is not level, close, but not. My tuck does not have a diff drop kit. I forgot to mention it has 1.5" wheel spacers and 285's, also there has been some clerancing done by p.o.
I do plan to drop the front diff and get some adj front struts and new springs after I get new bumper and winch this summer. Had a great time at MK last month on this setup!! Gsmtr next week!!
First little improvement. Wheelskins makes a decent product.
Are you selling that set up?
Yeah, you can have it for $100 plus the ride. If things go well, I hope to get the new in this weekend. I will post up when I get it pulled.
Cool. Where are you located?
I'm in Nashville. Will be at GSMTR next weekend, if anyone will be there that will be at boil maybe we can get a MUDship worked out.
Bodean
Hot Damn
DNP will be at GSMTR
Yeah it should. That is a top hat spacer that doesn't require removing the coils to put in longer studs. It should work on any 3rd gen 4runner.
It actually looks like the spacer they advertise for the 4runner.
3in Toyota Suspension Lift Kit (96-02 4Runner 4WD)
The one for the taco looks a little different so I think you should be good.
2.5in Toyota Suspension Lift Kit
@dnp when will you be at GSMTR. I should roll in sometime Thursday afternoon and be there thru saturday. If @LoneRanger wants the highlander parts, and you have room, perhaps we can get together.
Last edited: