Dash gauge pod?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 6, 2016
Threads
38
Messages
1,537
Location
Huntsville, AL
I tried to search, did not find much.

Has anyone mounted some gauges on the top of the dashboard? (in the style of a 70 / T4R / FJC / Montero)

I want to get some gauges but the typical A-pillar pod is not for me. My LC is neither fast nor furious.

It would be trivial to 3D print custom ones (or just an adapter for your normal ebay triple pods) IF the curvature of the dash could be worked out. I am not an expert at that kinda stuff.
 
I did not want A pillar gauges, but I went a 2holer anyway because I could not find a better location that has good visability and does not block anything else. I don't really care what others think my rig looks like. I got the racey thing outa my system back in the 60s and 70s. The 2 holer does allow for keeping the grab handle, since I am so old and decrepit!
 
Does the a-pillar block your view any? That's another concern of mine.

I'm thinking right on top of the two middle vents, turned to face the driver a little.
 
I was thinking about mounting gauges above the rear view mirror in the sunroof control area. There's not a bunch of places that a gauge pod would look good. And the places that a pod could fit seem to be out of the way. Thats partly the reason I'm doing a full custom cluster.
 
On top of the dash is just about the only place I can think of that won't block any view (keeping stock instruments). I agree that it is tricky.
 
I put a plastic butt pod under the dash. Same type of pod could be mounted on the dash, but I would hate drilling holes in the dash pad. Your right hand blocks view of these unless you're specifically trying to look at them. I originally planned on the top of the dash with these, like you are thinking, but decided this was the less destructive and more stealth route.

20160803_105608-jpg.1300961


The cheap ebay pods can easily be shaped with a dremel. I would buy one and screw around with it and see if you can make the shape you want. If not, it's only $10 down the toilet.
 
Last edited:
I've got a intercooler temp guage bouncing around on my dash because I can't decide what to do either. I never thought I'd be the guy that installed a pillar pod, but might have to. I like the pod on the fjc and old 4runner for altitude and tip, but don't want dash holes.
 
I am currently working on a dash pod for my 97 Cruiser. The initial concept can be found here Cayman Islands FZJ80 DIY build-up at post #133.
It is an on/off/on project so progress has been slow but once it is done, I can post all the details.
I will be placing 5 Glowshift gauges, a Toyota 60 series tilt/altitude meter and assorted switches in the pod. It is a very doable idea.
 
I have the roof console that some other markets got. They come with different options, mine came with sub tank/altimeter and there are other combo's including compass and something else which I cannot remember? The ful unit replaces the interior light and sun roof switches, looks neat IMO. You could fit your own gauges in that?

The one shown below is not mine, it is/was on sale on 'MUD'? If you have the electric roof then I am unsure if you can just swap the small panel that holds the switches? If not search for one complete with the switches. You may be able to remove the complete gauge part and fit three or four gauges in there?

roof console.webp


regards

Dave
 
Last edited:
I purchased a "Mudpod" and painted to match my interior, and mounted upside down at the bottom of the dash in front of the shifter. They sell 2 sizes, I used the larger of the 2. They are designed to mount on the dash of Land Rovers according to the site, but it worked great for what I was looking to accomplish. Lots of room for gauges, switches, power points, whatever you're looking to add.

Gauges.webp
 
Does the a-pillar block your view any? That's another concern of mine.

I'm thinking right on top of the two middle vents, turned to face the driver a little.

The pod siloette is only a little wider than the A pillar, so it was pretty easy to get used to. John
 
I purchased a "Mudpod" and painted to match my interior, and mounted upside down at the bottom of the dash in front of the shifter. They sell 2 sizes, I used the larger of the 2. They are designed to mount on the dash of Land Rovers according to the site, but it worked great for what I was looking to accomplish. Lots of room for gauges, switches, power points, whatever you're looking to add.

View attachment 1352985

I originally put my Scan Gauge down there. It was awkward to look at while driving on the trail so I moved it.
 
Does the a-pillar block your view any? That's another concern of mine.

I'm thinking right on top of the two middle vents, turned to face the driver a little.

I would not block the A/C for ANYTHING! Way too hot around here. But, I did mount an Ultra Gauge between those vents when I got tired of looking down to the console to see my Scan Gauge. I really like it now. All gauges are parallel with the OEM dash. Easy to look at and focus on quickly so I can get my eyes back on the trail ! John
 
No, not inside the vents, people who do that are dumb. I mean on top of the dash pad above the two middle vents.
 
Back
Top Bottom