Cracked sm420!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 8, 2004
Threads
125
Messages
433
Location
Gig Harbor, WA
I got my adapter plate and hardware in the mail, and was all pumped to do the sm420/3 spd conversion. As i tore into the tranny and finally got the gears out, i found a crack inside the tranny housing about 6 inches long. I was pissed!! I thought about welding it then grinding it down, but instead i chose to use the housing from my spare sm420 that had chewed up teeth. Lame.
 
But if we were considering the merits of trying to weld a 6" crack in cast iron, THAT would be tech. :D
 
Ohhhh, i see, now all of a sudden you are interested, i thought this thread was worthless. :rolleyes: :D
I'll get some pics tonight
 
Benjitis1 said:
Ohhhh, i see, now all of a sudden you are interested, i thought this thread was worthless. :rolleyes: :D
I'll get some pics tonight

Its worthless until you post some pics.
 
Back
Top Bottom