Colorado Newb introduction

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 17, 2007
Threads
6
Messages
30
After 1 year of lurking MUD and searching the internet for a clean 80 I decided to pull the triger on an 96 LX450:princess: with 140k. My wife said "you can get that black one as long as you put a snorkel and safari rack on it":bounce2: If you twist my arm I guess I can do it.......of course after the more important mods like lift, tires, slider, bumpers and so on and so forth. The PO was a mud member and kept great records of all the maintainence....most of which was done at the lexus dealer.

Here she is

lxSideDS.jpg


lxsidePS.jpg


lxpassengerseat.jpg
 
There are a few cracks in the driver seat....not to bad. All the other seats are in near perfect condition. I am thinking of taking the leather off the rear jumpseats and sewing it in the front seat. That way the leather matches perfectly. I dont think I will ever use the rear jumpseats anyway. Has anyone done this?

lxdriverseat.jpg
 
Mine are starting to suffer excessive wear on the door side of each seat due to lift and no sliders/running boards to help get in.

And also welcome :cheers:
 
Nakman, I understand the seats themselves are different sizes...I was thinking of actually cutting the leather off the rear jumper seats in pieces and replacing just the sections that are in bad shape on the driver seat. Since there are about 20 different sections of various shapes and sizes in the front seats it should be easy. In fact, I think that if I take out the seems first I can use the old pieces as templates while cutting the rear seats. Might also be a good time to add a heated seats!

Im sure someone on this board has done this.......anyone? pictures?
 
Nice ride :flipoff2: Now's the time to ditch the running boards- I found out the hard way that they don't do much except go "crunch" :o. Sounds like your wife would probably understand.
 
Mine are starting to suffer excessive wear on the door side of each seat due to lift and no sliders/running boards to help get in.

And also welcome :cheers:

I think I am going to record a video of my GF demonstrating the proper way to get in and out of the cruiser. This way you can politely e-mail it to your significant others. I taught her, now I am working on positive reinforcement! :lol:

For those of you who can't wait for the video here are directions for "Proper" exiting of 80's
Slide around 90° put both feet on sill, left hand on handle, bend at the knees and down & Out. :popcorn:
 
Welcome :flipoff2:. I have also learned to do the modified 90 degree swing and go exit. My leather is still very good but hinting at getting tired of my arce beating up the outside edge of the seat. Love your rig - looks like a nice find and with lockers too!:eek:
 
My wife said "you can get that black one as long as you put a snorkel and safari rack on it":bounce2:

OK, you've just made a quantum leap there at the very genesis of the purchase of an LX450 that very few mortals have managed.

My hat off to you sir, and your :princess:

:beer:
 
There are a few cracks in the driver seat....not to bad. All the other seats are in near perfect condition. I am thinking of taking the leather off the rear jumpseats and sewing it in the front seat. That way the leather matches perfectly. I dont think I will ever use the rear jumpseats anyway. Has anyone done this?


If either you are or your wife are skilled at upholstery, that may work. If not, you may want to look into other options. A member does sell new seat skins, see link below. Keep in mind that the Land Cruiser seats and LX450 seats are different. You can also look into re-dying with Leatherique or Magic Mender, which I have done myself. If you want to pursue that route, you are welcome to PM me and I can share some advice with you.

https://forum.ih8mud.com/showthread.php?t=141380
 
Welcome! Looks like a great platform. Great shape and dead sexy paint. Have you ordered the snorkel & rack? Get your wife to look at the Pics on Mud. That thing would look sweet with black wheels.
 
Back
Top Bottom