Club Work Day Saturday 12/08/07

[marius]

ill come and meet youall

 

[Hugh Heifer]

Unless somebody has these:
36222-60020 (Need 2 Ea) Idler gear thrust washer

33481-60051 Speedometer Drive Gear

90364-40001 (Need 2 Each) High speed output shaft bearing

90501-14029 Detent Compression Spring

90360-10003 Shift Detent Ball

90341-15001 Shaft Detent Ball Spring Plug

33403-69195 Speedo Driven Gear Assy (18x6)

33404-30040 Speedo shaft sleeve sub-assy

90301-18004 O-ring for speedo shaft

90310-09001 Speedo shaft oil seal

36726-60020 Idler Shaft Lock Plate

36313-60050 Transfer Front Drive Shift Shaft

90930-03075 Breather plug

33124-36010 Oil Receiver pipe

36323-60080 Transfer Shift Lever Guide

36362-60020 - Lever, Transfer High Low shift outer

36341-60032 Front drive shift link support


I will not be assembling the spilt case!!!!

But I will still come.

 

[chattfj40]

Strike out with c-dan?

 

[Hugh Heifer]

Strike out with c-dan?

Pmed him on the 20th or so and he Pmed me back that some of my numbers might be wrong. I rechecked them and Pmed back to him on Friday. Hope to hear from him this week.

 

[Clutchee]

What about Bob..........?

Have you checked with him?

 

[tellicorob]

When Y'all are at the shop look out the back door and you'll see the beginnings of our 4th generation of CruiserHeads in our family. Thats right FOURTH GENERATION. Roger picked up a running FJ-40 for my son Dillan. This puts us well ahead of my plans to build him one useing one of our old frames. We plan to start on it at Christmas and hopefully have it on the trail for the newyears day run. He also kicked in the motor for my wifes FJ-62 project. I want to say thankyou. I always suspected you were Santa Clause since I always see you surrounded by elves at GSMTR.

 

[DSLTOY]

I guess I better give you all directions. The address is 1405 Sheltontown Rd.,Manchester
At I-24 Exit 105 turn south on Hwy 41, go about 1/4 mile and turn Right on 16 th Model Rd (Whispering Oaks Campground sign), go 1.7 miles and turn left on Sheltontown Rd. turn right at first driveway (Tractor Repair sign), shop is at back of property.
See you There

 

[Hugh Heifer]

I guess I better give you all directions. The address is 1405 Sheltontown Rd.,Manchester
At I-24 Exit 105 turn south on Hwy 41, go about 1/4 mile and turn Right on 16 th Model Rd (Whispering Oaks Campground sign), go 1.7 miles and turn left on Sheltontown Rd. turn right at first driveway (Tractor Repair sign), shop is at back of property.
See you There

You got that, Sean? I will be the one sleeping in the passenger seat!

 

[TN_LandCruiser]

Is anyone driving their other than me or are they all being trailered?

Im bringing a friend of mine...he drives a <clearing throat> Ford :shotts:, but is coming along to watch and learn, oh...and drink beer.

Perfect candidate to convert to a LC.

Roger, Do we have a rig / head count for tomorrow?

 

[DSLTOY]

Here is what I have so far:
Todd- Front end/ Diff.
Steve +1- Front end/pinion seal/adj. Valves
Sean-Fan clutch
Me- mount new pitbulls
Janathan
Chris
DBrown
Marius
Larry D.+1
Clutchee
Bob
I have food for about 16 people.
If you are not on the list or have a project not listed post up.

 

[Goode]

And yet again, I cannot attend. I will be hosting my own workshop in my kitchen building a pantry. The we'll move to the spare bedroom to paint for a baby room conversion that's due next month. And that's only the beginning...

Come on out everyone, there's plenty of fun for everyone! Just call for directions. We'll leave the light on for ya...

Roger, I hope my workshop doesn't hurt the attendance at your workshop.

 

[TN_LandCruiser]

DBrown (David) will not be attending. I know this because I am bringing his FJ40 fenders up to Chris.

 

[sk8salomon]

And yet again, I cannot attend. I will be hosting my own workshop in my kitchen building a pantry. The we'll move to the spare bedroom to paint for a baby room conversion that's due next month. And that's only the beginning...

Come on out everyone, there's plenty of fun for everyone! Just call for directions. We'll leave the light on for ya...

Roger, I hope my workshop doesn't hurt the attendance at your workshop.

Sorry Andy, honeydew lists suck! Don't worry, I've got baby room stuff to do on sunday says the wife. Guess I'll have to wait another few months to see the Knoxville Blue Smurf wagon.

 

[chattfj40]

Well just finished getting everything loaded up. Its been a helluva week and I'm ready to relax and work on the cruiser.

See Ya'll there! I'm trying to get there by 8-830, but I habitually run late in the mornings...

I didn't get a chance to finish fitting up the half doors, so those are gonna have to wait...probably till I start the tube fenders that have been sitting in the garage for 6 months...Sorry Cam

Todd

 

[Hugh Heifer]

Well just finished getting everything loaded up. Its been a helluva week and I'm ready to relax and work on the cruiser.

See Ya'll there! I'm trying to get there by 8-830, but I habitually run late in the mornings...

I didn't get a chance to finish fitting up the half doors, so those are gonna have to wait...probably till I start the tube fenders that have been sitting in the garage for 6 months...Sorry Cam

Todd

And from the other side! Just got home. I am beat tired. Thanks for the fun day. Sorry we didn't get your junk back together, Todd, but I talked to Steve and he got home with no problems. I guess that extends the length of Roger's warranty past the end of the driveway! (Steve's CB even started to work!)

 

[TN_LandCruiser]

And from the other side! Just got home. I am beat tired. Thanks for the fun day. Sorry we didn't get your junk back together, Todd, but I talked to Steve and he got home with no problems. I guess that extends the length of Roger's warranty past the end of the driveway! (Steve's CB even started to work!)

Im beginning to become a little worried. Everyone is concerned over me making it home. Did someone forget some nuts and bolts?

Are you kidding? You guys advice was priceless and your knowledge invaluable.

Thanks again to everyone for helping me out today. I'd still be on jackstands (and out of ) without ya!

Not sure what my handle will be, but the 'ol cb is working. Anyone got ideas for a handle?

Ah s***...did I just ask that?

 

[TN_LandCruiser]

More pics

 

[sk8salomon]

Thanks Roger for letting us borrow all your crap and grease up your garage! It was great to be around so much cruiser knowledge and to see all the sweet rigs.

 

[sk8salomon]

anybody get pics of Roger's dog in action?

 

[sk8salomon]

couple more

LOL!!! What is Brandon pointing at???