Build BlackBox w/2F/H55/Split Case?

Member Builds and Stories

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 2, 2003
Threads
1,819
Messages
14,123
Location
Metro NY
I'm looking for someone that has done this install:
2F / H55 / BlackBox / Split Case
In particular I'm looking for real-world experience with what you did with the rear axle & rear driveshaft.
TIA
Mark
 
I'm looking for someone that has done this install:
2F / H55 / BlackBox / Split Case
In particular I'm looking for real-world experience with what you did with the rear axle & rear driveshaft.
TIA
Mark
Probably going to need to be pretty far back. My ‘80 fj40 has h42, rockbox, single piece case, with flipped rear fj60 springs. My rear driveshaft is 27” long. Bellhousing to d-shaft mount surface on my drivetrain is approx 27.5” (measured on apare drivetrain in container).
89E3F3F4-7B21-4B49-ABC7-CBDBE11330BA.jpeg


0B983865-35C9-47BC-8457-D9C4D65B785F.jpeg

193AAA01-C8E4-47F2-AA6B-8F02A86ADD8D.jpeg
D790788A-F5E5-44D5-B9D5-CAD968CE2D2A.jpeg


I have an h42/splitcase with the spacer, so same as h55/splitcase, and that is 24.25” driveshaft moonting surface to bellhousing mounting surface.
D6C04A50-CEC4-41D5-B205-D223CD3A2382.jpeg
E826A365-9206-4761-A941-C914FFE40267.jpeg



So, figure out the length of the blackbox and you can see what kind of rear driveshaft you could have on a stretched 40. Im thinking its going to be around 20-22 inches? Is that acceptable? These mesurements i gave are not exact to the hundredth, but they put you in the ballpark.

Also, read up on the black box. I have read nothing but unsatisfied reviews for the money spent.
 
Thanks.
I flipped my stock rear springs when I put the H55/split case in and the DS is about 25" long now. BlackBox with adapters is 8.23". So about 17"... pretty short but probably serviceable with the right driveshaft?


Where are you seeing blackbox reviews? (I did some searching but didn't see much)
 
I had an H41/Toybox/1pc tcase in my fj40 with flipped rear springs (SOA). I ran a cv joint rear shaft that was about 19". No problems.
Did you turn the rear diff up to face the transfer case?
 
How much suspension travel are you planning on having? Sticking with regular 2.5” type SUA or going to more flexy SOA?

If you go with 95-up U-joints/flanges/yokes (same pattern as all 85-up stuff) they have WAY more operating angle then Cruiser joints (like double) so you will have a much more allowance for angle with the short rear driveshaft.

They’re common and cheap too.
 
How much suspension travel are you planning on having? Sticking with regular 2.5” type SUA or going to more flexy SOA?

If you go with 95-up U-joints/flanges/yokes (same pattern as all 85-up stuff) they have WAY more operating angle then Cruiser joints (like double) so you will have a much more allowance for angle with the short rear driveshaft.

They’re common and cheap too.
Sticking with SUA with around a 2.5" lift. Bumping up to 35/36" tires I hope.

My FJ40.jpg
 
My rear is right about 17" long, with NV4500, Toybox, Split case. I'm SOA rear, flipped springs, and spring hangars moved back about 2-3". That's all coming out since I'm linking my rear and want a longer rear driveshaft. It works pretty well with springs, though.
 
I would low gear the split case and forget about the blackbox personally.
 
And an additional bit of info, I have a rear axle with parking brake, so no TC mounted brake drum.
 
I would low gear the split case and forget about the blackbox personally.
What split case low gear options are recommended?
 
What split case low gear options are recommended?

Are you planning on wheeling the same trails as you did with the 60?

4:1 in the T case and 4.11’s oughta be fine? 85:1.. i personally think anything over 100 is almost unusable anywhere other then Moab
 
Are you planning on wheeling the same trails as you did with the 60?

4:1 in the T case and 4.11’s oughta be fine? 85:1.. i personally think anything over 100 is almost unusable anywhere other then Moab
Funny, my thoughts on low low usability are the opposite. Here in the northeast rocks going stupid slow really is awesome. The one time I was in Moab it seemed like wheel spin was the ticket to get up and over.

No, I do not plan on wheeling black trail in the 40 like in the 60. I do not need to go as slow...

I don't want to lower my high range as this is going to be a street-use truck as well.
 
PS: 4.56 gears in the diffs.
 
Well you installed the Toybox in your 60, so you know what you are getting into with the complications of a doubler install.
If thats worth 140:1 gearing (5x2.72x2.27x4.55) then it sounds like you have a plan :)
 
Back
Top Bottom