Build Ben3DBuild

[GAbuildit]

Hey Ben- I am in need of one of these: M2 V2 LEFT: RAM Ball Mount for the Lower Left Center Console Panel, How do I order and what is the lead-time?

Also- Do you have any solutions put together for adding gauges- I am wanting to add an EGT and Boost gauge on my HDJ101.

Thanks!

 

[harshjay]

Heyo!

Do you have a catalogue page, or site somewhere, other than this forum?

I have a JDM LC100, and am wanting to use the overhead console for a round gauge, and a small speaker for my trail radio.

 

[GAbuildit]

Heyo!

Do you have a catalogue page, or site somewhere, other than this forum?

I have a JDM LC100, and am wanting to use the overhead console for a round gauge, and a small speaker for my trail radio.

You don't have 4 pairs of sunglasses you need to stow at once? Sounds like a good spot for the round gauge, I personally do not like the A Pillar mounted ones. Are you thinking 2 in one or what kind of gauge are you adding?

 

[harshjay]

You don't have 4 pairs of sunglasses you need to stow at once? Sounds like a good spot for the round gauge, I personally do not like the A Pillar mounted ones. Are you thinking 2 in one or what kind of gauge are you adding?

I have a JDM VX with sunroof, so I have an automated toll both card slot / broadcaster in the forward spot. I am just looking for a simple trans temp round gage from glowshift. Bought them before, after mucking around with a bunch of other companies stuff. Scangauge is no go, as OBD1 protocol on the JDM 100's

I would even do app based readout, just wanting to get some info when going out wheeling for hours, with the tc reductions, diffs, and bigger tires.

 

[BenCC]

Limited Blemished Sets (LX470)
1 set Mixed (white + amber)
1 set Amber/Yellow
MSRP $450 → $360 shipped (20% off)
Light cosmetic blemishes on the housings only — the fog lights are brand new.

What’s included:
• 2 housings
• 4 LED pods
• 2 plug-and-play adapters
• fasteners

Free shipping is for U.S. orders only.
DM me for more details and ordering.

 

[oosnapdoo]

Just sharing that I’ve purchased a “blemished” item from Ben and it was hard to notice anything obviously wrong with how it looked.

 

[Jczajka]

Just sharing that I’ve purchased a “blemished” item from Ben and it was hard to notice anything obviously wrong with how it looked.

Same, my blem looked new! Amazing quality

 

[BenCC]

Same, my blem looked new! Amazing quality

I need to talk to my QC (wife) haha.

 

[bcarbs]

Snagged the mixed amber and white from Ben last night! Thanks again - can't wait to get these installed. My OEM fogs w/ cheap Auxito LEDs are leaving much to be desired...

 

[terryscott621]

What are the LX people doing about the turn signals when switching over to the dual fog light pods?

 

[bcarbs]

What are the LX people doing about the turn signals when switching over to the dual fog light pods?

I'm planning on doing this...

Thread 'LX470 corner light to turn signal conversion'

Mar 27, 2020

Upgraded my headlights with HIDs that I got from @Luke111 and decided to upgrade my corner marker lights as well.

Got the clear corner lights from @ranma21

I knew that I would need to move my LX470 blinker signals eventually, as I plan to get a new front bumper after this next deployment. But with the clear corners I figured it was a great time to get this all out of the way right now.

Parts required:
Clear corners from @ranma21
Corner light socket, bulb (3 Prongs): 90075-99106 x2
Housing connector (3 Prongs): 90980-11020 x2
Terminal Repair (for insert into housing...

• prwillard2
• Replies: 32
• Forum: 100-Series Cruisers

• 

Or at the very least dropping the parking light feature and just re-routing the flashers up to the parking lights. I thought it would be cool to wire up some relays/logic that would maintain my outside amber fogs as a flasher + fog but more trouble than it's worth probably.

 

[primeral]

I just found this thread. Incredible selection, Ben

 

[AARONTLC]

I just wanted to say how great Ben’s products are. I have ordered 4 different makes and they have all been professionally wrapped and shipped. Fit has been spot on! If any of you have been on the fence about ordering, I say do not worry. You will be extremely pleased. Good job Ben! I will get you some pictures shortly.

 

[flipnidaho]

What are the LX people doing about the turn signals when switching over to the dual fog light pods?

Moved the turn signal function to the side marker. Not a hard job but it can be pricey if you have to buy the LC side marker housing to accommodate the bulb. I've seen some people modify the LX side marker housing to fit the bulb also but since my LX housings were already cracked, I just replaced it.

 

[hotdawwgman]

Moved the turn signal function to the side marker. Not a hard job but it can be pricey if you have to buy the LC side marker housing to accommodate the bulb. I've seen some people modify the LX side marker housing to fit the bulb also but since my LX housings were already cracked, I just replaced it.

I used the last 20% Sale from Toyota to order new Land Cruiser turn signal / corner lights, new bulb sockets, and ran then de-pinned the old sockets to make this work. Driver side wires are shorter than the passenger side, but it works perfectly. Really easy to do. I can share part numbers if needed

 

[Mapefy]

Had to do quite a bit of sanding to get it to fit, but very pleased with the result. The vintage gray krylon fusion is a very close paint match!

 

[Mapefy]

The scangauge holder is now installed!
I needed these two pieces for the wiring:
* https://www.amazon.com/dp/B0CQ884MWJ?tag=ihco-20
* https://www.amazon.com/dp/B016B13U9Y?tag=ihco-20

I don't have anything to hook the switches up to yet so I just put a couple dummy switches in there to fill the holes.

 

[SuperExciteBike]

Installed the overhead 6 switch panel and got most of the wiring done. Great product and very accommodating to my needs.

 

[Super77]

That. Looks. Amazing.

Like it rolled out of the factory.