cruiserpatch
Supporting Vendor
- Location
- United States
Part no. BD20-15DDUL from NSK fits the drive belt Idler Pulley part # 16604-0F010 in the 2UZ-FE engine.
Found on the 100 Series Landcruiser/Lexus LX, GX, etc.
A new pulley from Toyota costs $77.19 as of 6.15.2022 from McGeorge Toyota
I currently have 14 available units. I thought I'd open this to mud users before listing them publicly.
Bearings are available for $20 plus shipping.
*Note: does not include center bushing. Use hammer and sockets (or a press if you have one) to remove the old center bushing and install it in the new bearing.
More info: Idler & Tensioner Bearings thread
I will make a video detailing how to press out old bearing, old center bushing, and install new bearing into pulley.
@2001LC has been searching for these for a while. Hope this helps.
Found on the 100 Series Landcruiser/Lexus LX, GX, etc.
A new pulley from Toyota costs $77.19 as of 6.15.2022 from McGeorge Toyota
I currently have 14 available units. I thought I'd open this to mud users before listing them publicly.
Bearings are available for $20 plus shipping.
*Note: does not include center bushing. Use hammer and sockets (or a press if you have one) to remove the old center bushing and install it in the new bearing.
More info: Idler & Tensioner Bearings thread
I will make a video detailing how to press out old bearing, old center bushing, and install new bearing into pulley.
@2001LC has been searching for these for a while. Hope this helps.
