Are these berfields any good

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2012
Threads
25
Messages
119
Location
Calgary Alberta Canada
I have some berfields laying around that came with a parts truck I purchased. I have them up for sale right now but am wondering if maybe I should hold onto them for my own axle. Let me know if you know anything about them and if they are worth holding on to.

IMG_1519492328994.webp


20180224_100918.webp


20180224_101016.webp


20180224_101001.webp
 
That is your basic Chinese CV that seems to be available from many vendors under different names. It has the extra step around the bell that is missing on the OEM CV and some of the other aftermarket CV joints.
 
Maybe 7 years ago I picked up a set of cheapo Chinese-made Birfs with that extra step; IIRC my research was that they copied a short-lived birf from around 94-95 that may have fit some other models??

They were very inexpensive but when compared to my used original Birfs they appeared to be of a much lower quality with chatter marks from the machine tools/bits, had an unfinished area inside the bell of the birf, and rough edges with tiny splinters of metal hanging on. I got the impression the Chinese factory skipped half a dozen quality checks and made them on old machinery. Sent them back. FWIW.
 
As far as I can tell, nobody has actually run the cheap CV joints to tell whether they hold up or not. I bought a couple of Febest ones for $50 each as trail spares, but I don’t want to be a Guinea pig. If I use one as a replacement, I will let it ride and find out.
 
Crazy cheap! However I’m with many and don’t want to be the first, especially it would cost more in grease and small parts that the list price.
 
Back
Top Bottom