Hello,
I've been reading you for a while now, and really enjoyed all the ideas I found here.
Time for me for a quick introduction : I'm French (so apologize if my technical wording seems stange), and the happy owner of a 97 HDJ80 (Diesel 1HD-FT) VXv, that I am currently preparing for my next trip in Tunisia.
I previously owned a HDJ100 that I really enjoyed, till my automatic transmission broke down. And I can tell you that finding the appropriate company to fix an automatic transmission in France is a true challenge. So after 7 months waiting for my transmission to get repaired (i'm not joking), I sold it, and replaced it by my current 80, with no electronic, and a manual transmission that can be easily fixed in Africa if need be.
I'm currently preparing it from scratch for a fresh new start :
- revised power steering pump
- revised starter
- new water pump
- new clutch
- heavy duty spring + shock absorbers (OME)
- sliders
- roof rack
- probably recaro seat
- home made storage (to come)
- home made support for GPS+tripmaster+DV-cam
As a first contribution, here are some pics of the GPS+Tripmaster support. the idea was to setup a dummy roll-bar, as I did not want to drill the instrument panel.
If is made from 25mm (sorry for the metric measurement system) iron bar used for home cloth storage found at a Wallmart-Like store.
The only tricky part is that you need to bend the side bar, so that you can fix the horizontal bar properly (I did not want to weld) ; so It took me some attemps to find the proper angle.
I will post additional pics as my preparation will continue.
Rgds
Arnaud
I've been reading you for a while now, and really enjoyed all the ideas I found here.
Time for me for a quick introduction : I'm French (so apologize if my technical wording seems stange), and the happy owner of a 97 HDJ80 (Diesel 1HD-FT) VXv, that I am currently preparing for my next trip in Tunisia.
I previously owned a HDJ100 that I really enjoyed, till my automatic transmission broke down. And I can tell you that finding the appropriate company to fix an automatic transmission in France is a true challenge. So after 7 months waiting for my transmission to get repaired (i'm not joking), I sold it, and replaced it by my current 80, with no electronic, and a manual transmission that can be easily fixed in Africa if need be.
I'm currently preparing it from scratch for a fresh new start :
- revised power steering pump
- revised starter
- new water pump
- new clutch
- heavy duty spring + shock absorbers (OME)
- sliders
- roof rack
- probably recaro seat
- home made storage (to come)
- home made support for GPS+tripmaster+DV-cam
As a first contribution, here are some pics of the GPS+Tripmaster support. the idea was to setup a dummy roll-bar, as I did not want to drill the instrument panel.
If is made from 25mm (sorry for the metric measurement system) iron bar used for home cloth storage found at a Wallmart-Like store.
The only tricky part is that you need to bend the side bar, so that you can fix the horizontal bar properly (I did not want to weld) ; so It took me some attemps to find the proper angle.
I will post additional pics as my preparation will continue.
Rgds
Arnaud
<---(MUD Salute)