Alternator rebuild

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 14, 2013
Threads
176
Messages
1,274
Location
Sandy Utah area
Anyone put new brushes in their alternator? Its about $25 in parts and I was thinking that while I am replacing my radiator I might as well tackle it. how many bananas?
 
Assuming you have the tools...
 

Attachments

I haven't done it, but, yes, it looks that way. But the bearings would be on my list too, if I had it open. That makes it a "several more hours" long job...
 
Little bit of a hi-jack but still related.

With the cold temps 5* - 25* F my alternator is not charging on intitial startup. Once I get up to temp it starts charging. Is this an indication of bad brushes? Or is more investigation necessary. I'm tempted to just buy a new alternator since this one has ~220k mi on it.

Brian
 
Once it's off, brushes are simple. Bearings take a bit more commitment, press or pullers, etc. Did mine, after repeatedly, successfully drowning it, the bearings started grumbling and complaining. :hillbilly:
 
... I'm tempted to just buy a new alternator since this one has ~220k mi on it.

Brian

Have done it both ways, this one works well: Denso 210-0181 ~$100.
 
Have done it both ways, this one works well: Denso 210-0181 ~$100.
Does anyone know where and by whom these alternators are being rebuilt? Is a dealer reman unit being rebuilt on the same bench as the less expensive Denso units available from china - oops- I mean amazon or eBay or Napa or................. it's like this is a secret.
 
Does anyone know where and by whom these alternators are being rebuilt? Is a dealer reman unit being rebuilt on the same bench as the less expensive Denso units available from china - oops- I mean amazon or eBay or Napa or................. it's like this is a secret.
Agreed. Hard to get good data on what is going in those alternators. If the original MrT unit had Koyo bearings in it and it gets reman'ed with "any other" bearing it seems less of a quality part.

$100 is a great price for sure for a Denso tho.
 
Does anyone know where and by whom these alternators are being rebuilt? Is a dealer reman unit being rebuilt on the same bench as the less expensive Denso units available from china - oops- I mean amazon or eBay or Napa or................. it's like this is a secret.

Most Denso starters/alts that we have installed say USA, a couple said Japan, the ones that looked new. If you're concerned, get your stuff at the dealer, I hear they have the best Chinese stuff!:hillbilly:
 
Agreed. Hard to get good data on what is going in those alternators. If the original MrT unit had Koyo bearings in it and it gets reman'ed with "any other" bearing it seems less of a quality part.

$100 is a great price for sure for a Denso tho.

IIRC, mine had shielded bearings, don't recall brand, after time underwater they gave up. Replaced them with sealed bearings from the local bearing house, don't recall brand, has worked well, consider it an upgrade.:meh:
 
IIRC, mine had shielded bearings, don't recall brand, after time underwater they gave up. Replaced them with sealed bearings from the local bearing house, don't recall brand, has worked well, consider it an upgrade.:meh:
Cool. Real world (intense off road) tested.

Thanks for the part#
 
Waiting for a Denso to show up today, rockauto $106 delivered (+core) once I have the Toyota one out I'm going to do a full rebuild on it.
 
Waiting for a Denso to show up today, rockauto $106 delivered (+core) once I have the Toyota one out I'm going to do a full rebuild on it.

Good luck. I was unable to split the case on mine.
 
Alternator is yet another original part on my Cruiser that is still alive and performing well. To me...that is just unbelievable. Vehicle is 21 yrs. old with 298K miles on it. I continue to be amazed at the number of 'original' items that are still working fine and have not (yet) had to be replaced or repaired.
 
Alternator is yet another original part on my Cruiser that is still alive and performing well. To me...that is just unbelievable. Vehicle is 21 yrs. old with 298K miles on it. I continue to be amazed at the number of 'original' items that are still working fine and have not (yet) had to be replaced or repaired.
This is where Im at, 295k miles original thinking...hmmm I wonder how those brushes are doing...
 
Back
Top Bottom