Aftermarket carb hats that work on a 2F (1 Viewer)

[fjdemon]

@NookShneer you didn't have any issues with the carb hat? If so what modifications did you need to do? Thanks!

 

[NookShneer]

None with the carb linkage. The carb stud need to be lengthened in order to clear the top of the carb hat. I did this by spacing out the threaded part into the carb with a nut. There maybe a longer bolt out there by Mr. T but it was a quick fix that has held up fine so far.

 

[NookShneer]

Some photos of the set-up.

 

[fjdemon]

None with the carb linkage. The carb stud need to be lengthened in order to clear the top of the carb hat. I did this by spacing out the threaded part into the carb with a nut. There maybe a longer bolt out there by Mr. T but it was a quick fix that has held up fine so far.

Thanks! Great info.

 

[Spike Strip]

Is there a gasket in the Spectre Plenum? (in the opening that fits over the carb)?

Thanks.

 

[NookShneer]

@Spike Strip not sure on the Spectre Part. I'm running a 3F carb hat which does have a gasket around the bottom lip.

 

[Spike Strip]

ah, OK, thanks.