Actuator removal: caution

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2017
Threads
26
Messages
90
Location
Central NC
Rear actuator removal, taking things very slowly...lots of CorrosionX (PB Blaster stuff). Met one stubborn bolt...OxyA and gentle nudging, because stripping etc. equals bad juju. One bolt, $800 replacement.

DSC_1383.webp
 
Last edited:
Get the $280 Puma and a $50 Air cylinder and send $47 my way for consultation (10% of the $470 you saved)
16406471_1509909095685959_2306997819641506677_n.webp
 
Is there a write up somewhere on converting to that air cylinder?

I know Bimba makes a cylinder that would likely work. Have not spec'd it yet.
I saw it on Facebook, and thought Genius and saved the pic so credit is not mine.
My actuator works fine, but would consider this if it pukes.
 
Back
Top Bottom