A great weekend!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 20, 2006
Threads
197
Messages
4,673
Location
TN
I just thought I'd rub this in since i have drooled over all your modded rigs for so long and i'm finally getting to build mine up. :D:flipoff2::D

I went up to Maryland this weekend to visit my sister for a few days and on the way back stopped by IPOR in Fredricksburg VA. to pick up a skid plate for my Cruiser and a t-shirt.
When I got home there was a package on the front porch from Marlin Crawler with my 1.5" wheel spacers and an envelope from Brian Sweargrin with my Ih8mud stickers. :D They both shipped fast. (thank you)

I am waiting for Slee's 4inch lift to put the wheels and tires on. What kindof penetrator does everyone recommend to loosen up the suspension bolts and other stuff to prepare for the lift?
i'll post some pics when the lift arrives. have a good day everyone.:cheers:
genimage.webp
 
I second the PB Blaster. Great stuff. Be sure to go ahead and hit the bolts with it now and let it sit for a day or longer to really get the good out of it.
 
3x on PB blaster, but on really rusty stuff you HAVE to spray it on everyday for a number of days in a row, even then- stuff still breaks if you're not careful.

Spray both sides of the bolts (if accesable).
 
Ahh, a little Christmas in July I see.
A good christmas. And a lot of scenery on the roads. I dont see many Cruisers around town where I live but saw tons heading into DC. One was looked factory but an old couple driving and had a snorkle. There were a ton in VA and most had ARB's and a few mods. Then all the different ones at IPOR. yeah.

For some reason the snorkle looked like it was bigger than others I've seen. I guess I'm just used to seeing them on lifted rigs.
genimage.webp
 
nice combo!!! im running the 4'' lift w/ those wheels (hypersilver though :crybaby: i wanted the charcoal) and 315 at's. I picked up my wheels and the skid all in the same trip to IPOR as well; still no wheel spacers though. You need to come join us in tellico if your stuff is in and on; or even if its not.
https://forum.ih8mud.com/showthread.php?t=162519
 
nice combo!!! im running the 4'' lift w/ those wheels (hypersilver though :crybaby: i wanted the charcoal) and 315 at's. I picked up my wheels and the skid all in the same trip to IPOR as well; still no wheel spacers though. You need to come join us in tellico if your stuff is in and on; or even if its not.
https://forum.ih8mud.com/showthread.php?t=162519

Thanks for the invite. I would love to go but have to work.
The charcoal looks really cool and I was almost ready to get some silver ones and repaint them grey until i found mine on ebay. Im still looking for another one for a spare. post a pic of your rig if you get a chance please.
 
Last edited:
PB's

Have you ever used PB's with rubber glove's? Not a good idea it eats the s*** out of them. Wonder what it does to you with out any protection?
 
Sounds like your getting there EG, congrats on the new "toys". And to think when we were kids a $2.00 cardboard box was what thrilled us ;) now its grown up boys and their expensive toys - looking forward to see your pics as it all comes along.
 
Thanks Eric, Cant wait to get the lift and everything else on. Then its time to save a little money and then think about a rear bumper.

Sounds like your getting there EG, congrats on the new "toys". And to think when we were kids a $2.00 cardboard box was what thrilled us ;) now its grown up boys and their expensive toys - looking forward to see your pics as it all comes along.
 
erg80 man

'scuz the ignorance: the wheel spacers you just got..im going to guess they are for keeping your 35's from hitting the inside of the fenderwells/frame when full turn? Also, while we are at it - are you looking into the caster correction bushings for the lift (maybe they come with it?). Whatcha think?

As for me you ask? Im spending $$ too! I got my sliders back from getting the Inyati coating on them and am waiting for them to be welded on tomorrow (or so he says). Patience, dammit, patience!Also installing new coil springs in the front to get rid of the stinkbug effect and the accompaning alignment. Then ill be done for a while (yeah, right!!!!) :grinpimp:
 
I got the spacers to keep from rubbing and to widen the stance a little bit becasue the Tundra backspacing narrows it. For the lift I went with the Slee control arms so I could upgrade to the 6 inch if I wanted to.



'scuz the ignorance: the wheel spacers you just got..im going to guess they are for keeping your 35's from hitting the inside of the fenderwells/frame when full turn? Also, while we are at it - are you looking into the caster correction bushings for the lift (maybe they come with it?). Whatcha think?

As for me you ask? Im spending $$ too! I got my sliders back from getting the Inyati coating on them and am waiting for them to be welded on tomorrow (or so he says). Patience, dammit, patience!Also installing new coil springs in the front to get rid of the stinkbug effect and the accompaning alignment. Then ill be done for a while (yeah, right!!!!) :grinpimp:
 
sorry for the delay, heres a few... no spacers so they sit inboard a bit and rub in rear inside of tire on wheel well when stuffed.
wheel change 002 (Medium).webp
flexin 003 (Medium).webp
 
Back
Top Bottom