Parting Out 88FJ62 SoCal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LittleRedWgon said:
@lavapokey
Heater Core available???
Windshield Cowl weatherstripping?
Click to expand...


I have both the front and rear heaters/cores. Both are in good condition. The heater worked well before I began parting this truck.

Front heater core - $80
Heater housing with pipes and core - $140
Rear heater core - $80
Rear heat assembly with everything as a unit: housing, fan, pipes, core, etc - $160

When you say windshield cowl weatherstrip are you talking about the windshield rubber? Or the long flat gasket that tuns between the firewall and hood right under the windshield? I don't have the windshield rubber, but I still have the other one. It's not in that great of shape. If you buy other things I'd throw that in!

If you have Facebook you can look up my photo page and view photos of these here at EPAC Cruisers and look in the 88 FJ62 photo album. Look through the other albums as well.
 
lavapokey said:
I have both the front and rear heaters/cores. Both are in good condition. The heater worked well before I began parting this truck.

Front heater core - $80
Heater housing with pipes and core - $140
Rear heater core - $80
Rear heat assembly with everything as a unit: housing, fan, pipes, core, etc - $160

When you say windshield cowl weatherstrip are you talking about the windshield rubber? Or the long flat gasket that tuns between the firewall and hood right under the windshield? I don't have the windshield rubber, but I still have the other one. It's not in that great of shape. If you buy other things I'd throw that in!

If you have Facebook you can look up my photo page and view photos of these here at EPAC Cruisers and look in the 88 FJ62 photo album. Look through the other albums as well.
Click to expand...


Great! I'll take the front heater core and the flat rubber gasket would be awesome!

I was also wondering if you had the hard fuel line clip mounts...? There are two, they are small and metal... one bolts to the side of motor and the other by the thermostat housing... the hard fuel line clips into them for support...got those??


Let me know what you need for shipping to 85296... and what your PayPal is.. I'll get it sent over! Thanks!
Jared
 
Rear anti-sway bar? Shipped to 81301?
 
LittleRedWgon said:
Great! I'll take the front heater core and the flat rubber gasket would be awesome!

I was also wondering if you had the hard fuel line clip mounts...? There are two, they are small and metal... one bolts to the side of motor and the other by the thermostat housing... the hard fuel line clips into them for support...got those??

I'm going to pm you on this stuff.
Click to expand...
 
That sound fair, Lavapokey. Go ahead an add in the links/struts and let me know the totals.

Hope to have them by the 16th, by the way.
 
Need A/C line: PART# 88716

There are 2 hard lines that go thru the firewall. I need the smaller, thinner one, curved and about 12" long.

Shipped to 93513.

Thanks, John
 
Last edited:
You must log in or register to reply here.

Similar threads

dcashley84
Parting Out SoCal 93 fzj80 part out
Replies
2
Views
417
dcashley84
dcashley84
dcashley84
SOLD socal left over 94 fj80 frame with body and misc parts.
Replies
4
Views
1K
stvrn6
stvrn6

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom