80 Series GIS Skid Plate now available

LC4LIFE

Supporting Vendor
 
Joined
Jul 30, 2007
Messages
1,327
Location
Colorado Springs, CO
HuddExpo is now offering the Gray Industries Skid in both Fully welded and DIY versions.

The fully welded version comes in black electroplated zinc and the DIY version is bare steel. Both kits come with frame mounts and hardware (new frame hardware qty 8 M10 grade 10.9 JIS bolts and oversized washers, frame u-bolt, and 2 M12 10.9 bolts, washers, and nuts for the TC skid support) the transmission mount nuts are reused.


Each piece of the DIY kit has been plasma cut from .25” mild steel and they interlock for simple placement for welding. The transfer case skid simply slides over the main crossmember and bolts into place for welding, then bolts are removed. New hardware for all mounting positions are included, but the transmission mount nuts are reused.

The main skid/crossmember is 36lbs and very easy to lift in to place with one person.

Simple installation fitting around factory exhaust and many aftermarket slider configurations, tested and verified with: Slee, Metal Tech, etc.

Here are some pics of both versions and here is the design thread - different take on the trans mount and skid plate

$290 for the DIY version shipped - 80 Series GIS Skid - DIY Kit
$375 for the welded, electroplated version - 80 Series GIS Skid - Fully Welded

Image-2.jpg
Image-3.jpg
IMG_3124.JPG
IMG_3139.JPG
 
Last edited:

LC4LIFE

Supporting Vendor
 
Joined
Jul 30, 2007
Messages
1,327
Location
Colorado Springs, CO
Good News! Both versions back in stock and a bit ahead of target. Welded/Electroplated versions are getting hardware put together today meaning everything will be shipping out Monday or Tuesday. If you want in on this round of this sweet skid, get it ordered!

For those of you that pre-ordered, thanks a bunch, and they will be heading your way soon.

Order the welded/plated version here - 80 Series GIS Skid - Fully Welded
Order the DIY kit here - 80 Series GIS Skid - DIY Kit

David
 

LC4LIFE

Supporting Vendor
 
Joined
Jul 30, 2007
Messages
1,327
Location
Colorado Springs, CO
Good evening everyone,

Another batch is going into production later this week. I do however have a special opportunity for the Colorado peeps nearish to Colorado Springs. I plan to bring a pallet in to save on shipping. We will split up the savings on shipping so the more to commit, the more will be saved. If you live somewhere near (like within 75mi) of Colorado Springs, PM me and we can work it out. I already have a handful committed, but would like to get a few more so the savings are even greater. Non CO orders will be treated normally.

Thanks,

David
 
Last edited:
Top Bottom