80 Series General Tech and Classifieds
- Thread starter MEMCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
If not otherwise committed I will buy those off of you. I need to try a set on the front of Half Ass to see if I can stop cutting up those dang 39"Reds.
- Joined
- Apr 17, 2009
- Threads
- 16
- Messages
- 2,662
AndyO's got 'em.
How bout we just swap a set of 37" reds for your problem child 39's...no spacers required. Win/win.
@Bossman if they don't work for me or the rear comes down with the bumper I will let you know.
- Joined
- Apr 17, 2009
- Threads
- 16
- Messages
- 2,662
@Bossman knows I'm just messin.
Does anyone have an extra driver floor mat? The 80 came with weathertechs but is missing the driver.
I
f I can't figure out how to make the 40" Treps pull on my smart car-ish buggy those cut up bitches are going on it and Half-ass can give them a try. Gonna need a little more lift in the front or extended bump stops.
- Joined
- Apr 17, 2009
- Threads
- 16
- Messages
- 2,662
Fill em up with water.
Looks good Andy. Congrats.
I've got a diagnosis question for y'all. First symptom I noticed was a rattling noise coming from the front end when I let off the throttle on the interstate. The noise goes away under any load, only happens when I'm coasting. Noticed it about 4K miles ago, has gotten progressively worse. Yesterday my diff breather tube started puking gear oil. Guesses? My fear is pinion bearing or something like that.
I've got a diagnosis question for y'all. First symptom I noticed was a rattling noise coming from the front end when I let off the throttle on the interstate. The noise goes away under any load, only happens when I'm coasting. Noticed it about 4K miles ago, has gotten progressively worse. Yesterday my diff breather tube started puking gear oil. Guesses? My fear is pinion bearing or something like that.
Could just be front driveline vibration. Lube the slip yoke and see if it gets quieter. also drain the front diff and look for metal, if gear oil is coming out the vent my guess is you have water in your diff
It has been a few years ago but I remember him doing a knuckle job soon after he got the truck. So within the past 5 or so years. About the same time he grabbed those seats from half ass...
I've got a set of 1" Marlin spacers I bought from Grogan and never used. Think I gave him $60 for them..??
Front spring spacers? I'll take 'em. Coming to the Boil?
ha, no. Wheel spacers. I just re-read your post.