80 Series Factory Bumper Swing Out DIY Kits (3 Viewers)

[Skrugg]

You just have to watch this thread like a hawk to get your order in... I'm hoping to get in on the next batch too but I'm not holding my breath.

 

[richmondbob]

Please add me to the notification list. Thanks.

 

[grapeismurder]

This is the only thread I have email alerts set for.

 

[94YotaGuy]

I'll prepay the full amount of it guarantees me one from the next batch. I'm not excited about dropping $1800 for a full rear bumper.

 

[Skrugg]

Please add me to the notification list. Thanks.

There isn't a notification list. You need to set an alert for this thread and watch!

 

[yoopermike]

This is awesome. I need one...will be watching.

 

[lcgeek]

No message

 

[ThomasMore66]

I have a driver's side that I'm willing to sell. I bought it in Jan of 18, then promptly blew out my knee which delayed installation. In all that time, I've decided to do something different. There are a couple of issues:
1) FedEx completely destroyed the original packaging, but @SUMMIT CRUISERS Jr was completely stand-up about it and replaced all of the missing/damaged parts.
2) It's all sitting in my garage in a Home Depot bucket complete with instructions, etc.
3) I'm in the Dallas area and not too keen on shipping it.
4) It's completely as-is/where-is.

PM me if interested.

 

[Skrugg]

I have a driver's side that I'm willing to sell. I bought it in Jan of 18, then promptly blew out my knee which delayed installation. In all that time, I've decided to do something different. There are a couple of issues:
1) FedEx completely destroyed the original packaging, but @SUMMIT CRUISERS Jr was completely stand-up about it and replaced all of the missing/damaged parts.
2) It's all sitting in my garage in a Home Depot bucket complete with instructions, etc.
3) I'm in the Dallas area and not too keen on shipping it.
4) It's completely as-is/where-is.

PM me if interested.

Damn! If you were in Phoenix AZ I'd buy it in an instant! Dallas is a bit far, unfortunately...

 

[94YotaGuy]

PM sent

 

[ThomasMore66]

Damn! If you were in Phoenix AZ I'd buy it in an instant! Dallas is a bit far, unfortunately...

I think I would feel better if the buyer laid eyes on what they are getting. I don't want to misrepresent anything.

 

[EPIC Cruisers]

I realized I had not updated this thread with my recent addition. Thanks again Garrett!

What did you paint the actual bumper with? Looks great!

 

[yoopermike]

I think I would feel better if the buyer laid eyes on what they are getting. I don't want to misrepresent anything.

I would be interested if there was consideration of shipping, but I totally get not wanting to mess with it. This would be for a trail/bush rig and aesthetics are really not a concern. I just need to get a spare on here somewhere, without putting it inside, or sometimes reluctantly on the roof.

 

[ThomasMore66]

I would be interested if there was consideration of shipping, but I totally get not wanting to mess with it. This would be for a trail/bush rig and aesthetics are really not a concern. I just need to get a spare on here somewhere, without putting it inside, or sometimes reluctantly on the roof.

I believe I have it sold.

 

[Skrugg]

June is coming...

 

[SUMMIT CRUISERS Jr]

June is coming...

I am interning in Kansas City until mid August so no batch of kits will happen until I’m done with that. It might be a late fall batch or one really large one this winter depending on my fall semester.

 

[Skrugg]

All the best! Good luck with that.

[cries internally]

 

[94bruiser]

Have you wanted a better way to store a tire on your rig without sacrificing precious interior cargo space or rear departure clearance? Unwilling to spend $1000+ for a heavy swing out bumper just to carry a larger spare tire?

Introducing the Summit Cruisers factory bumper swing out kit. This kit includes the parts and instructions you need to build a rear tire swing carrier for your vehicle while utilizing the OEM rear bumper.

View attachment 1274684

View attachment 1274686

View attachment 1274687

View attachment 1274696

View attachment 1274689

Pros


Heavy duty 1 3/4" spindle with grease zerks


Gas strut assistance


No need to install auxiliary tail lights


Extremely robust and stable design


Lighter weight alternative to a heavy rear bumper


Less expensive alternative to a heavy steel bumper


The tire swing out is available for either side of the vehicle

Does not attach to the body of the vehicle like the oem style. Keeps body smooth and rust free.








General Information

For kits sold before January 2018, those are Version 1.

Kits sold from January 2018 to current are Version 2.

Details for Version 2 can be found on page 12.

These are built in batches and then modified for the side chosen once the deposit is paid. I do not build these to order. Once they are gone, I won't have any more available until I have time to build more.


As this is a kit, welding is required. All pieces to build the tire swing out are included along with a license plate extension bracket. Auxiliary bumper lights not included. The receiver relocation kit is not available. A latch plate that bolts into the pintle hitch mount will be included. Cooler/jerry can baskets are not available. Some tools/hardware are needed to finish this kit.


*This kit is designed around holding a 6 lug OEM 16x8 wheel with a 35x12.5" tire. It also works with the 17x7.5" FJ Cruiser/4Runner wheels with more backspacing.




Starting at $520+ shipping (PM me for shipping outside of the US)



$100 non refundable deposit required. Let me know which side you would like the swing out to go on when you submit your deposit. From that point, the kit should be in your possession in under 2 weeks. Rest of payment due before shipping.

(PM me to confirm your information and for placing a deposit)

Paypal or cash if local to Oklahoma City, OK.

are these spare tire kits still available?

 

[SUMMIT CRUISERS Jr]

are these spare tire kits still available?

Sorry. None available at this time.

 

[ceylonfj40nut]

I have a driver's side that I'm willing to sell. I bought it in Jan of 18, then promptly blew out my knee which delayed installation. In all that time, I've decided to do something different. There are a couple of issues:
1) FedEx completely destroyed the original packaging, but @SUMMIT CRUISERS Jr was completely stand-up about it and replaced all of the missing/damaged parts.
2) It's all sitting in my garage in a Home Depot bucket complete with instructions, etc.
3) I'm in the Dallas area and not too keen on shipping it.
4) It's completely as-is/where-is.

PM me if interested.

I am in Dallas. Is this still available?