74 Factory air - 55 - socal

[65FJ45]

Location

United States

this pig had the factory air setup (not sure how rare that is). I have the condenser(?) (under dash coil) and duct that is goes in-- and I'm pretty sure anything that would have been inside, including the temp knob (so far that's all I see). I didn't have the compressor on it but I have 2or3 different kinds of compressor mounts (see pix below) . Asking $225 for choice of bracket, compressor, duct, knob and add on pulley setup. The compressor would be a core. I don't know anything about how the brackets mount. The compressor and bracket in the first picture has an extra bracket for something on the other side. I have no idea what it's for, anybody?

Other 55 parts I have from this 74
All the doors, fair cond. Drivers has crease
All glass except pass. rear side and WS
Fenders, Tailgate
Rear Seat, needs recover

714-561-0049

 

[Trollhole]

pix please.

marshall@828rugs.com

 

[cml25]

Does the tailgate have all of the gears and regulator for the window?
pics also cml25@cox.net
Thanks

 

[DANNO]

Second in line for the tailgate. Pics would be nice. I do not need any of the "guts".
Danno6113 at comcast dot net.
Thanks

 

[65FJ45]

Will post pix asap... thanx

Here is the tailgate stuff.... and some Misc. AC brackets. I don't know what is from what. I am pretty sure the pulley is an ad-on for the single pulley Ballancer if you need it.

 

[cruiser_guy]

Dibs on the inner door trim panels for front doors.

 

[cruiserbrett]

How much for these two brackets circled in red? Can likely pick up in a week or so.

-Brett

 

[Trollhole]

this pig had the factory air setup (not sure how rare that is). I have the condenser(?) (under dash coil) and duct that is goes in-- and I'm pretty sure anything that would have been inside, including the temp knob (so far that's all I see). I didn't have the compressor on it but I have 2or3 different kinds of compressor mounts (see pix below) . Asking $225 for choice of bracket, compressor, duct, knob and add on pulley setup. The compressor would be a core. I don't know anything about how the brackets mount. The compressor and bracket in the first picture has an extra bracket for something on the other side. I have no idea what it's for, anybody?

Other 55 parts I have from this 74
All the doors, fair cond. Drivers has crease
All glass except pass. rear side and WS
Fenders, Tailgate
Rear Seat, needs recover

714-561-0049

225 is a really good price. Someone needs to jump on that.

What does the sticker say on the back of the duct? Anymore pics of the front side and the controls?

 

[65FJ45]

The sticker says Lardy Mfg. Co 76-032418. This pic show the dash of the 74 that it came out of and you can see the dial under the dash near the drivers right knee. I assume this is a factory setup but I never heard of a 74 with AC. It could have been moved from another car I suppose. Here also pictures of a couple other compressors I have, one with a double pulley and one with a single. I don't think there is anything else on the inside but if someone knows better let me know. I also have an extra dial that I found in a box that I will throw in. I am not sure that the ad-on pulley will do the trick. I have the double pulley on the motor but I wasn't planning on including it because of the labor factor, I will need to replace it and it might be useful if I use the motor, which I might.

 

[65FJ45]

more pix. Regarding selling the two brackets, I will give a price after I am sure that nobody needs one of then with this setup. I thought I had a 60 compressor laying around, I might.

 

[cruiser_guy]

This picture

is the altenator mounting.

The A/C doesn't look like my Nippondenso unit and Nippondenso is Toyota's OEM supplier.

 

[Trollhole]

It's a Clardy unit. They were dealer installed units. Not factory but still cool. I've never seen one until now. Very cool.

 

[65FJ45]

I am showing the double crank pulley in the picture not the alternator bracket. Trollhole, thanks for the bumps. It's a nicely designed unit that fits perfectly in the vehicle. It didn't have the compressor or the brackets the stuff shown is what I had laying around from collecting a few years back. You have to determine the best setup yourself from the pictures as far a brackets. I don't know anything about putting this stuff in and makingit work. Let me know if you want a better angle on that bracket. This is a reasonable price for what I am asking. Again you get your choice of compressors, brackets and the add-on pulley, plus the duct/coil and control (and a spare control of same type). If you want the pulley off the crank I need a good single back plus $75. Shipping is all on you but I will box it up for free. Thanks.

 

[n2666s]

Luke111's pig also IIRC had a "Clardy"....they were out of TX and have been out of business for a while........ do you have the brackets for mounting the condenser?.....also am needing the compressor bracket for my 74..but am in line behind Brett I guess TIA

Lou

 

[PabloCruise]

My '74 has air - not sure if factory or dealer installed...

 

[cruiser_guy]

My '74 has air - not sure if factory or dealer installed...

Factory air would look like this except that the rotary knob to the left of the vents would be a thumb wheel. It had to be changed in my truck as the A/C control system from the factory A/C did not work with the diesel engine swap.