400 sbc

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 30, 2007
Threads
20
Messages
244
Location
N42.25492 , W-121.78743
ok, I have a chance to get an entire Chevy k5 with a SBC 400 for 250... I'm thinking either keep the Chev, or swap in the SBC 400 automatic tranny and all...

what do you all think? how hard could it be?
 
id buy it. if its cleasn keep it if body trashed make it a careless wheeler or scrap it and do a engine swap. I personally wouldnt run the TH350 and TH400 that came factory in those but to each his own.

it doesnt take much to beef up a 700R4 to handle some power and you will also have a lower first gear and overdrive as well. i mean really a 4l60e is simply literally an electronic version of the 700r4 and think how many people have those in they chevy trucks straight from the factory.
 
I guess thats my real question here, has anyone done this swap before, is a SBC a SBC? or are there differences (aside from 50Cubic Inches)? do I need different motor mounts? I know how to adapt the auto to the x-case but do I need a rear transmission mount?


there should be a V8 swap support group ....
 
A 400 SBC is the same engine basically as a 350 SBC, as far as brackets, mounts...etc it would use the old school setup just like a SBC 350 of the same year model. I belive the harmonic balancers are different and the flexplates / may be different. As i recal the cylinder heads have "steam holes" ...externally a 400 SBC is the same as a 350 of similar year vintage, excluding the items I listed.

With the old school engine and if you run a newer 4 speed auto like a 7004R you will need a way to control the lock up conter. I think B&M and others make a controller for this.

Old k5 blazers are pretty cool trucks anyway..
 
Spend 25$ & get the conversion manual from Downey Downey Off-Road

It'll tell you everything you need to know.

Their conversion kits are the most complete &, unless you work for free, worth the money.

Didnt tell me much that wasnt already apparent...unfortunately there's alot of miscellaneous/unanswered in that manual. While it certainly has a good deal of info it isnt the bible.
 
Dirty -

If it isn't the bible, what is?

experience and knowledge.

i read that little book and honestly i didnt learn anything at all that i didnt already know. I really thought that there would be something but there really and honestly just wasnt.

an old school swap is stupid easy a newer updated swap is slightly more complicated but not by much.
 
so really, I can get a 350 swap it and make the rest up as I go?

is that what I am hearing?

oooh I'm gettin awl excited!
 
Hey Sarcastro - Search for 400 SBC in the 60 series section - I know there's someone in the neighborhood (MFD or GP?) that has a 400 in their 60.

FJKai - is the name of the guy - try PMing him
 
what year is the K5 and what year is your 60?

You may have smog issues with a older motor in a younger truck..
 
newer motor, '87 K5 in an '82 goat


is there any reason to not use the TH350-400 (not sure which) auto that's in it?
 
newer motor, '87 K5 in an '82 goat


is there any reason to not use the TH350-400 (not sure which) auto that's in it?

These are simple and sturdy, but they have no overdrive. A 700R4 is an attractive choice because they're cheap, they have a really low first gear, an overdrive and a locking torque converter. My neighbor who owns a tranny shop does dozens of installs every year in Jeeps, Toyotas, etc.
 
Th400 takes alot of horsepower to turn and weighs more than the others.
 
good to know, I think I may just stick with the th350... I'm going to be spending enough money on the build as it it :)
 
newer motor, '87 K5 in an '82 goat


is there any reason to not use the TH350-400 (not sure which) auto that's in it?

Were they still making the 400 in 87? I know you said the K5 is an 87, but it might be worth double checking.
 
dont know if I ever will sell it, but I'm pretty sure its an '87 a quick search on wiki says they didnt offer the engine in '87.. maybe a lie, maybe a swapped in engine... for 250 bucks I've tried to care, but I just dont
 
Back
Top Bottom