40 series general tech and classifieds

[wct49]

1981 Toyota FJ45

 

[euclid]

Anyone need 40 parts?

I'm helping my buddy Matthew part one out that was the donor for his project at White Rhino fab in Canton. It's getting posted on the classifieds on mud now so if you want it holla at me soon with an offer.

1974 Fj40
Body is beyond repair.
Engine ran good when parked for donor.
Axles are complete.
Frame is very rusty but I don't see holes, just really bad surface rust.

 

[MScruiser]

Yes! I need a ton of parts!

Interior heater parts, and lots of 2f parts, including the air cleaner assembly and upper radiator shroud.
May also be interested in exhaust manifold I see and exhaust.

 

[dnp]

If that's a 2F (wasn't '74 the "split" year?), may have a buyer (before Andrew goes all buzzard on it.....)

 

[Clutchee]

Grill and bezel?

 

[offr0adlim0]

That has a F in it

 

[dnp]

That has a F in it

Thx. Couldn't remember

 

[MScruiser]

Thx. Couldn't remember

 

[Bodean]

If it's a 74 then it's the 1.5 F motor. F bottom end and a 2F head. They only did it one year.

 

[MScruiser]

If it's a 74 then it's the 1.5 F motor. F bottom end and a 2F head. They only did it one year.

So that'd mean it has a 2f exhaust manifold?

 

[Bossman]

That's a 1F valve cover

 

[Bodean]

That's a 1F valve cover

Yep, my 74 1.5F had an F valve cover on it. I'd bet the head oils thru the rocker arm assembly as opposed to the way the F head oils.
Also, if it's a 4 speed then that's the 4sp tranny 3sp t-fer case set up from the factory (only one year)

 

[MScruiser]

Went and checked out Greg's 40 today. Engine tranny and transfer case is all there. Radiator looks great, new fan assembly. Early electric bellview 8274 that has new cable and looks operational. Frame and body are completely shot. Some interior parts available, like switches, heater hoses, etc. Rear heater is in pristine condition.

Early steering wheel with red "T" available too.

 

[SHUSH]

@gwalt584

Looking good!!!!

 

[gwalt584]

Well, Thanks. you should have stopped to chat.
You know I can always talk Landcruisers.
take care.
Gary

 

[wngrog]

Where do you live Gary?

 

[MScruiser]

Yep, my 74 1.5F had an F valve cover on it. I'd bet the head oils thru the rocker arm assembly as opposed to the way the F head oils.
Also, if it's a 4 speed then that's the 4sp tranny 3sp t-fer case set up from the factory (only one year)

@wngrog You should stroll over there and see if this has the 2f intake manifold.

 

[SHUSH]

Well, Thanks. you should have stopped to chat.
You know I can always talk Landcruisers.
take care.
Gary

Gene took that. Rest assured Id have swung by.

 

[SHUSH]

Where do you live Gary?

@wngrog
Free State

 

[Bossman]

I'm working on a little project and need a couple of parts. I am putting together an early (60's) fj40 bib to hang on the wall at the Hot Springs ORV Park office and need one headlight bucket and a somewhat crusty bezel to complete the bib I found. Anybody have a rusty bib laying around that I could rob these parts off of?