4.88s or 5.29s ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 25, 2005
Threads
47
Messages
695
Location
Grass Valley CA
If you wear me….what would you do?

I wish I could drive both around to see. Can you help me make the right choice? Some helping info:

The truck is a DD and the main family car. We live in the high foothills of the Sierra Nevada Mountains at 3,000 ft. The Nevada county area has some of the steepest terrain in the country or at least the roads etc. These windy steep road are driven a lot but so are freeway at about 70 sometimes even faster if Tree is driving or if we are trying to keep up with the “speed racer” aka Lacobra. I’d say most of the daily miles are two line highway miles an average speed of say 60mph to the Auburn area and back from about 1,200 to 3,000ft.

Having the right gearing is very important to me. My truck is on the heavy side too. Most of you know I was never ok or happy with the stock gears and the 33s. And if I knew for sure that I was going to stay with the 2.5” lift and 33s I would have eventually re-geared to 4.56s.

The 5.29s sound more like what I would want but would I be more prone to breaking them. That’s not ok.

I’m really torn on this.:confused:
 
If I were you I would make Little Boss happy :D

With that said. I am real happy with the 4.88's and 35's. I have no desire to run bigger than a 35" tire and so this is the perfect setup. Better low end torque when wheeling and can still drive over 80MPH at less than 3000 rpm (2800).

I felt that if I went 37's I would be likely changing broken birfs where as 35's it's possible. Thats just my opinion.
 
I am running 37s and 4.88s...power down here is fine.

I would like to do 5.29s, but I just broke a 4.88 front set, so my odds aren't good for 5.29s :)
 
gears

4.88 works great with 33's and 35's and would still work w/ 37's. I have had two built up fzj80s, and have a uzj100 all on 35s w/ 4.88's and all used as dail drivers. I am at 3300 ft, and still works great for me. Any bigger than 35's I'd go 5.29
 
Good point Ken!:)

Sounds like 4.88s for me!

how much $ is that transfer case gear reduction thing I read about?
 
Back
Top Bottom