2h turbo mods

[Bill429]

Running 10 psi through the 2h atm plan on installing a front mount inter cooler soon. what other mods should I do so I could run more boost safely. Iv read 12psi is about Max boost safe for them

 

[Tapage]

I'm pushing 14 - 15 for about 10 or 12 years now .. still there .. I did nothing to the engine itself, bunch of diesel and do all in my power to control the water / head temp.

 

[Bill429]

Okay then awesome that's good to know

 

[mongoose2231]

I just turboed my 2h a couple months back. I'm running a factory ct26 of a 7mgte and it's set to open at 6 or 7 psi. I can't even rev past 3k cause the boost reaches 7psi right around there. I may have to shim my wg actuator or buy one that is already set to like 10 pounds or so. Also, I installed a egt gauge to make sure the temps don't spike over 1200. Haven't touched the fuel screw but I can easily climb past 1200. Looks like the po had turned up the fuel to get more oomph prior to me acquiring it. I may have to turn the fuel down some. An inter cooler helps a lot with egt 's.

 

[Bill429]

Yer I'm running a td05 my waste gate opens at around 2000rpm but keeps climbing sounds like yours isn't getting enough fuel

 

[Tapage]

CT26 from supra ( supra turbine ) it's way to big for any stock 2H .. not adequate for it's power band ( narrow )

 

[pistonpete]

I'm pushing 14 - 15 for about 10 or 12 years now .. still there .. I did nothing to the engine itself, bunch of diesel and do all in my power to control the water / head temp.

Tapage, how many miles were on here before you put the turbo ??

 

[Tapage]

Tapage, how many miles were on here before you put the turbo ??

she was something like 400K kilometers .. aso like 250 miles on it ..