I have a 2008 Land Cruiser 200 series and I mounted 2019 200 series wheels on it and am having trouble getting the front hub caps to mount due to hitting the hub itself. does anyone have any experience or advice as to how to make this fit properly?
2008 Land Cruiser Wheel Fit
- Thread starter jscho2410
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Spacers or a newer year hub cap ( the cap on the hub itself). Forget what year you need though. If i remember correctly I think there are some tabs on the back of the wheel center cap that can be trimmed off.
In 2016 Toyota changed the wheels and as a result they changed the dust cap over the front hub nut.
You can try trimming the tabs but the wheel will still contact the old dust cover and deform it. The correct move here is to source 2016+ hub dust covers and install those. Part number is 43514-60020
Some people just leave the cover off.. I wouldn’t want water and corrosive things making their way into the nut and big splines though.
You can try trimming the tabs but the wheel will still contact the old dust cover and deform it. The correct move here is to source 2016+ hub dust covers and install those. Part number is 43514-60020
Some people just leave the cover off.. I wouldn’t want water and corrosive things making their way into the nut and big splines though.