1F and 1.5F differences

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2005
Threads
187
Messages
2,090
Location
Havertown, PA
I did search, but didn't get too much info. I have an early model '74 I bought as a parts truck with the earlier model 1F. I just acquired a 1.5F from a mudmember with 80K. My question is will most of the components swap over from the early model 1F to the 1.5F? The 1.5F block is bare, but the 1F is complete, but locked up. I'd rather have the 1.5F anyway, but don't want to have to source intakes and exhaust manifolds along with other items which will not interchange between them. Any info would be greatly appreciated!!:D
 
thanks for all your help!!:flipoff2:

Searched 1F "titles only" and got 18 pages worth of results. It may not be the actual name, but I'm sure most know what I'm talking about. Please interject your wealth of knowledge on other peoples threads. It doesn't impress me, and your often condescending remarks are quite often annoying.
 
Last edited:
thanks for all your help!!:flipoff2:

Searched 1F "titles only" and got 18 pages worth of results. It may not be the actual name, but I'm sure most know what I'm talking about. Please interject your wealth of knowledge on other peoples threads. It doesn't impress me, and your often condescending remarks are quite often annoying.

Lol, really? How is that condescending? Show me an example of being condescending in the past.

Back to tech...

Calling it a 1f doesn't do you any good. There's a lot of "1f's" out there and they can be very different depending on whether it's an F120, F135, F145, F155, etc... If you want an answer to your question, you're going to have to be more specific about what you have.
 
I thought he was specific enough, he said he has an early 74, that should have an F155 in it. He has the revised F155, commonly called an F 1.5, as he has probably already identified the integrated oil filter.

From my experience, everything should cross over fine, unless the F engine that is locked up in your 74 is actually an earlier model. If the thing has an aluminum intake that looks like most F engine intakes and is not the very early Siamese port version, then you should be able to swap all of it straight over. Water pumps are interchangeable, thermostat, etc. You will not need the external oil filter housing of course. Everything else you should be able to swap over part by part. For that matter, most 2F parts should fit on it too.

Look at the year spans for the parts on Spectors website if you are really curious, but I think you can swap and go.
 
Yes, all the accessories (air cleaner, carb, manifolds, alternator, fuel pump, senders, water pump, starter) will move over. I switched out a F with the F.5 and moved the accessories (everything but the exhaust manifold) over just fine. I did make the move to a header as part of the switch, but could have used my exhaust manifold with no issues.

That said, when you indicate the F.5 block is bare - does it have the head? I ask because the change in the oiling system from F to F.5 that I believe requires the head to be correct.
 
Lol, really? How is that condescending? Show me an example of being condescending in the past.

Back to tech...

Calling it a 1f doesn't do you any good. There's a lot of "1f's" out there and they can be very different depending on whether it's an F120, F135, F145, F155, etc... If you want an answer to your question, you're going to have to be more specific about what you have.

The complete motor is stock from an early model '74 like I stated in the OP. With the exception of the '74 I didn't know that Toyota had different style engines within a year (could be wrong :confused:). SO, stating that both motors were from a '74 (one being early and one being a later year model) should have filled in the blanks for you.
 
Yes, all the accessories (air cleaner, carb, manifolds, alternator, fuel pump, senders, water pump, starter) will move over. I switched out a F with the F.5 and moved the accessories (everything but the exhaust manifold) over just fine. I did make the move to a header as part of the switch, but could have used my exhaust manifold with no issues.

That said, when you indicate the F.5 block is bare - does it have the head? I ask because the change in the oiling system from F to F.5 that I believe requires the head to be correct.

Yes the head is still on. All the accessories are off though.

Thanks for the help guys :cheers:!!
 
I did search, but didn't get too much info. I have an early model '74 I bought as a parts truck with the earlier model 1F. I just acquired a 1.5F from a mudmember with 80K. My question is will most of the components swap over from the early model 1F to the 1.5F? The 1.5F block is bare, but the 1F is complete, but locked up. I'd rather have the 1.5F anyway, but don't want to have to source intakes and exhaust manifolds along with other items which will not interchange between them. Any info would be greatly appreciated!!:D

Where did you say that the engine was the stock, original engine from 1974?

You said it was the earlier 1F. That could mean anything.
 
Where did you say that the engine was the stock, original engine from 1974?

You said it was the earlier 1F. That could mean anything.


I put in early model 1974 for a reason, but I'm guessing someone like you needs to have it spelled out.

Please go away my man. You haven't contributed a thing to the thread. You are like a damn annoying gnat that will not stop buzzing in my ear. Find another poster to annoy.
 
I put in early model 1974 for a reason, but I'm guessing someone like you needs to have it spelled out.

Please go away my man. You haven't contributed a thing to the thread. You are like a damn annoying gnat that will not stop buzzing in my ear. Find another poster to annoy.

Please go back and read your first post with the point of view of somebody that doesn't know your exact situation. I think you'll see the ambiguity.

You said you bought an early 1974 with the earlier 1F. Sorry for sounding dumb if I don't know what that means. Not every truck has original engine it left the factory with.

Why have you taken such offense to what I've said? I asked you to be more specific so we could give you specific, accurate answers. I wasn't trying to hurt your feelings. I just wanted to make me sure you didn't get the wrong information.

Again, I never meant to patronize or offend you. I gave you a little jab about the engine name thing, but that's the kind of fun we have around here. I would have tossed in the mud salute had it been available from my phone.
 
Last edited:
I have what we call the "F and a half" ... Then some point people started calling it the 1F.5 or F1.5 or F.5 but to end confusion you need to make one of these... It ends the confusion LOL

The Odd ball F155
image.webp
 
I have what we call the "F and a half" ... Then some point people started calling it the 1F.5 or F1.5 or F.5 but to end confusion you need to make one of these... It ends the confusion LOL

The Odd ball F155

:clap::clap::clap:

I just might have that sticker made. I'd also have them put the link to this thread in fine print on the bottom.
 
Last edited:
Please go back and read your first post with the point of view of somebody that doesn't know your exact situation. I think you'll see the ambiguity.

You said you bought an early 1974 with the earlier 1F. Sorry for sounding dumb if I don't know what that means. Not every truck has original engine it left the factory with.

Why have you taken such offense to what I've said? I asked you to be more specific so we could give you specific, accurate answers. I wasn't trying to hurt your feelings. I just wanted to make me sure you didn't get the wrong information.

Again, I never meant to patronize or offend you. I gave you a little jab about the engine name thing, but that's the kind of fun we have around here. I would have tossed in the mud salute had it been available from my phone.

Splangy, I'm not going to lose any sleep over this. No hard feelings at all, BUT when you say "that's the kind of fun we have around here" I'm not a newbie by any means. Hell, I have almost 5 years on your join date. I'm also not an FJ40 expert by any means, but I'm no stranger to wrenching on these vehicles. You NEVER offered information with your replies. To me, you just made it seem that I was a newbie who needed to do some thread searching. If you replied with a question asking (even in a completely sarcastic way) if the parts truck was the original motor I would have been fine. That's tech to me.
 
Last edited:
Back
Top Bottom