transmission

My project has switched directions. A442 with electronic lockup has about 123,000 miles on it. Comes with… Cooler lines Torque converter Bell housing Rear end plate Computer $3200 + shipping Does not include T-case

Brand new take off parts from an H152 transmission. Maybe someone needs them? Release fork Slave cylinder Release bearing Front bearing retainer Bell housing

Hey fellow cruiser lovers unfortunately this pump failed. I have had a tranny specialist working to source this pump. He has just recieved the second replacement, also the incorrect part. Perhaps someone has a a442f transmission they are willing to sell, or a pump from the hydraulic a442f...

Hey guys I know this answer is somewhere in the forum, but neither forum nor google search revealed the answer. I have a clunk/ hard shift when shifting from P to D or R, from D to R and back, ... In addition my gear indicator light for D is not working. I know that in the depth of this forum...

Hi All - I got a 60 series a few months back. Total newb, long story, but I've been trying to fix her up as a hobby to give me something to do and learn about cars finally. I have been using the forums to do all sorts of work, so thanks for all the help. Replaced the PCV valve, exhaust...

I'm seriously considering selling my Tacoma and LX 470 and buying a GX 460. But I started reading about GX 460's having transmission problems. The more I research, the more common it seems. I really, really don't want to own a vehicle that is prone to trans problems! And while I am very...

This all started with it not going into 2nd gear. I pulled the transmission and had a look inside and couldn’t find any obvious issues. I then reinstalled it to do some more diagnosis and found that the shifter seat was cracked and the shifter alignment pins were very loose. Replaced those. This...

Automatic transmission fluid cooler, includes mount $150.00 plus shipping.

For Sale: I have a Low mile HJ61 Automatic Transmission w/T-case & BellHousing available. (153,000kms or 95K Miles) Engine has SOLD and customer who purchase the engine didn’t require the matting Auto. $1100 - USD. Shipping assistance is available.

I have a 3 speed transmission and a 4 speed transmission. The 4 speed needs an overhaul and the 3 speed works. Asking 250 for both. Yon reach me by cell at 559-646-4422 or message. Thanks

A442F transmission and transfer case pulled from a 1994 Land Cruiser. I need this out of my way ASAP. $250 Located in Sturgis, SD and willing to ship

Parting out a 2001 Highlander with a running 2.4L 2AZ-FE, bad U140F transmission. Able to ship any small parts via USPS

ive had a hard time getting the trans pan to seal, on a 91 4runner. and recommended sealants or tricks? i have thought about just getting a new pan

I have a 14BT and just picked up an h151F. Is there a go between bellhousing? I searched but came up nada. Thanks

Hello all, super happy to finally be part of this group, I'm a longtime lurker. Always been a 4runner fan, but out of the US now and just bought a new-to-me 1990 FJ80 5-speed manual (pics for love), and am having some trouble with shifting into 2nd gear. Going up from 1st isn't an issue, but...

Hey everyone. I’ve been using my ultra gauge to keep track of my transmission temps on my 2013 LX with the 6 speed AB60F. I’ve been seeing torque converter temps as high as in the 230s when accelerating up grades during cross country highway trips. Pan temps are normally around 185 - 195...

1993 Toyota 1KZT-E engine, trans, transfer case out of a KZN130 Hilux Surf. Motor has 69k miles. The motor compression tested 450-455psi each cylinder. EGR appears to be intact. Marketplace video and listing This surf tipped on its side, and I acquired it from the owner at the time. I pulled...

I drained the pan, 2004 100 series. I got about 2.75 qts out. I went to fill and realized I wasn’t prepared- no dipstick and I didn’t have the right kind of transfer pump or the 24mm socket. I found a small 12mm plug in front of the linkage right above the pan and managed to get the new fluid in...

H151F 5 speed manual, with 1FZ input shaft and Bellhousing setup. This came out of a US spec, 1FZ powered 80 series, it was swapped into the truck a couple years ago. Running great when removed. No known issues. I helped swap it into, and out of the truck myself. Includes...

So nearly two years go I pulled this off my HJ60. I stuffed this away and labeled it "transmission - support plate". Cannot figure out where this goes back, anyone who knows or has a pic of their own? 1984 HJ60, 2H, H55F