Working on an old school SM420 Advance Adapters 2 1/4” plate adapter to a 3 speed case. Casting number is 1113. Transmission uses a replacement main shaft that has the LC 10 spline output. (Current one made by AA uses a longer adapter and an “extender” shaft that slides over the original SM420...
Hey everyone, I'm looking to see if anyone here has or knows of someone looking to get rid of an sm420 to LC 3sp adapter plate. I'm striking out pretty hard on locating one because apparently they have fallen out of demand. If anyone has any leads, I'd greatly appreciate it.
Thanks
Mike D
Hey everyone, I'm looking to see if anyone here has or knows of someone looking to get rid of an sm420 to LC 3sp adapter plate. I'm striking out pretty hard on locating one because apparently they have fallen out of demand. If anyone has any leads, I'd greatly appreciate it.
Thanks
Mike D
I recently bought back a rig I had sold some 10 years ago and would like to start with changing out the trans. Here's my current setup:
1969 FJ40
5.3L Vortec (LM7)
SM420
3spd transfer case
2" body lift, SM420 didn't require any floor mods
stock axles
Primarily looking to get Overdrive or at...
Looking for a sm420, Had 3rd gear replaced in mine(broke 2 teeth off), put it back in and it’s not going to 3rd at all without grinding. Looking for one in good shape, so I don’t miss cruising this summer with the kids. In the Cincinnati tri-state area on the Indiana side. Thanks Ryan
Having to sell (or trade for fj60) my 73. Need more room for the family. 1973 fj40, 5.7 TBI, sm420 Trans, siginaw power steering , tilt column, 4” HFS springs, late 40 front disk axle ,tire/cooler carrier built by me. No rear seats, center dash piece is covering a jacked up dash. All work was...
For sale new never installed Advanced Adapter flywheel and clutch kit 712500M.
https://www.advanceadapters.com/products/712500m--flywheel-and-luk-clutch-kit-for-ls-series--gen-3-engines/
Made to adapt an LS/3 Gen series to manual transmissions (M21/M22, SM420, SM465, NV4500).
I bought it with...
My 77 Fj45 has an SM420 transmission and I've bought a H42 to swap back into it as the 420 is in bad shape. Does anyone have insight on modifications that would have been done to get the Chevy trans in there? Or could the h42 be bolted back it into the housing and go from there?
Thanks in advance!
Extra Clean 71 FJ! This thing is NICE!!!
Super strong BUICK 350 V8 with accel distributor and K&N air cleaner
SM420 granny 4 speed tranny mated to a 3spd transfer case
Excellent soft top and doors. Hard doors available!
Power disc brakes on all 4 corners
SOA done right with front shackle...
I had great expectations and plans to put a SM420 into my FJ40. But, alas, life has taken a different turn and I have headed in a different direction with 40. What does this mean for you - if you want to undertake the project, I am offering a smoking hot deal on this entire setup. Some assembly...