rear

I have a rear wiper arm for an 80 series for sale. The part # says it's 91-92 but I can confirm it'll fit 91-97. I bought it new 5 years ago so it's lightly used but still looks new and puts plenty of pressure on wiper/rear window. $40 OBO. Located in Salt Lake City, UT.

Looking to replace the solid rear panel in my '75 FJ40 with split lower doors. I'd love to get them with both sides of the hinges and the center latch.

Is there any way to know whether I have a 62 mm (90311-48010) or a 65 mm (90311-48023) oil seal, without having to do a physical inspection or take the rear drive shaft off? My truck is a 1992 HZJ73, manufactured in March 1992, and it's an automatic.

Rear fj40 bumpers $100 set

Switch works, fan blows low or high depending on the switches on dash, problem the air is not hot, not even warm just cold or outside temp. Front heater works fine, what could cause this? I’m assuming the front and rear heaters share the same heater core? If not where is the heater core for the...

might be time to start thinking about rear lockers. would love some factory cable lockers, but I think you need the matching axle shafts. would prefer selectable lockers but probably would be ok with auto for the rear. thoughts? opinions on types? Go ;-)

Rear jump seats $400

Rear fj40 jump seats. No cushions $200

For sale: 61-7/70 FJ40 Rear Drum brake wheel cylinders and shoes $150 obo + shipping Thanks Ernie

Does anyone have a cheaper source of rear lower control arms? For new parts, ebay is the lowest at around 160 per side shipped. I've also checked Partsouq and rock auto. I'd be fine with remanufactured, but couldn't find that option. Thanks

Looking for rear shock for LX470

I need a set of 12 backing plate bolts for the 70s FJ40 rear axle. These bolt the brake backing plates to the axle housing. Apparently they have a special shaped head. Shipping to 28461. Thank you.

Hello everyone. I am planning to buy a new rear drive shaft for my the lX 470 2001. On one of the forums I found information that it can be replaced with the original one from the TLC 200 diesel version, without any changes. It is changed because splined is much thicker. Has anyone had such...

Pulled the 3rd out of my rear axle so I could modify the housing to accept a locked 3rd. Was in working order when pulled. 270,000 miles on it. The clutch discs definitely don’t work anymore () $250 OBO local pickup preferred. will ship on your dime

My 200 Series Land Cruiser (2018) recently failed it's annual/required safety inspection when it was pointed out that the vehicle's rear brake lights didn't work. I've looked at fuses both in the engine compartment, and under the driver side dash, which corresponded to the rear lights - no...

Looking for a pair of the factory rear bumper stays for the OEM bumper. These are a u-shaped bracket that attaches to the outside of the frame ends and provide attachment points for the bumper. I'm reverting back to a stock bumper from an aftermarket one and one of the previous owner removed...

Hi there! I was quoted $800+ by a shop to fix this rear axle seal leak, I’m new to cruisers and bought my LX 3 months ago and am baselining all maintaince items slowly so I apologize for any ignorance. Is the condition of this severe and urgently needing replacement? Let me know if more pictures...

I’m looking for bumpers front and rear. ARB up front. Rear, lid like some swing outs. Shipping to New Mexico, 88310. Please let me know, thank you.

I’m looking for a light or lens cover for the rear side marker lights on my 80. I busted a lens in the brush this weekend.

67.00 plus shipping.