fj60

Hi, I’m looking to convert my non-US spec FJ43 from drum to disc brakes. In search of a front pair of FJ60 (knuckles to hub). Please let me know if you are interested in selling. Thanks

I have a 2FE converted FJ60. I have been having the hesitation/stutter/and fuel starvation from hell... the truck will run pretty good until about 10-20 minutes of driving. That’s when the hesitation/lack of throttle response/bogging/fuel starvation starts happening most frequently. Original...

I am looking for old school roof racks for my 60 series landcruiser. If anyone is selling some or can recommend some to me please contact me cheers

Good morning all you de-smoggers out there! I've been tracking down some exhaust leaks on my smogged FJ60 and discovered that my air rail is toast, with one inlet complete broken off. Not only that, the PO had done a hack job on a repair (I'm officially a Cruiser owner now) and two of my Air...

As the title says looking for a Full Float Rear OEM 60 axle. If anybody has a line on one let me know. Thanks

Here's a pretty low-effort post contemplating selling or trading my FJ60. I like my 60 a lot. It is a ton of fun to drive. I've rebuilt the knuckles and desmogged it. It's manual steering on a power steering box. The pump was bad when I got it, had been run dry. I think it might have leaked out...

found this on amazon japan maybe some one can shed some light, did he cut his or was it a option

The books are in good condition. Haynes - $16 shipped Chiltons - $11 shipped Paypal F&F drake.m@phoenixdyno.com

Howdy Mudders, I am selling my 1985 TLC FJ60 that I've had for a couple of years. This has been my project vehicle. Minimal Rust. Located in Kitty Hawk, North Carolina. The car spent most of its life in the Colorado Desert. Vehicle - 1985 FJ60 Land Cruiser Mileage - 258,889.7 Color- White...

Cylinder 1 lifter is believed to be collapsed at the bottom where it meets the cam lobe. Looking for input on how to remove as it seems to be stuck. Will move freely until a certain point (about 3/4" exposed) and then will not move further. There's room to get channel locks etc. on it but no...

Hi all, New to all of this so hopefully someone can help me out. I have an fj40 and would like to swap my axels with fj60 axles. My question is can the fj60 axels just bolt onto my fj40. The fj60 has 3.73 gears and I am unsure what mine are. What will I need to do for this conversion. If you...

Looking for FJ60 door jam molding in gray for the drivers rear door opening. If anyone has a lead on one of these that would be awesome. Pic attached for reference (Pic is from right door opening) Thanks in advance!

linkage blow up

Good cover, inside is about perfect. $25 obo shipped Red and green books in the bg not included.

Good to great condition. $35 shipped obo.

Cover is fair to good, inside is about perfect. Electrical diagrams in the back are in good condition. FJ, BJ and HJ 60 & 75. $50 shipped obo

84 FJ60. Very nice rig. New parts in boxes. Roof rack (not on it) Warn winch, snorkel,Weber carb,header. 6cyl gas engine,4spd. Good running driving FJ. Lots of potential. Rust in the tail gate. Good weather stripping,head liner etc. $6500 220k miles Reasonable Offer.

Original 1984 FJ60 Was parked after there was a knock in the lower end. It will need new or rebuilt engine. The interior carpet is gone, Seats are OK, door cards are good, dash is good, headliner is good. It has light surface rust on the frame. Some rust in the rear wheel wells and light...

I bought this shackle lift kit and intended to install on an FJ60 and never did. Claims to be 1 1/2" long and 2" longer than factory. Not sure if it fits FJ40's or other models. Non grease-able bolts. Paid $165 plus shipping. Asking $100 plus shipping. Located in Casper, WY 82601

I'll be flushing and changing the ATF in the A440f this weekend in my hj61, but can't find how much fluid the transfer case needs. I have read the gear box itself needs 6ltrs, but I'm not sure if it is more with a complete flush. I will be using Gulf Western Dextron III ATF for both. Also, how...