I have searched all the other torsion bar threads (inc the main one here FAQ) but can't find the answer
I'm fitting Iron Man torsion bars. In the instructions, and even in the video (at 17 mins in this video Iroman USA ) they feed the bar through the cross member, then align the front cup T...
Hey I recently purchased a smittybuilt center console on Amazon meant to fit a 87-95 wrangler yj and trying to fit it on my fj62 Land Cruiser was wondering if anybody has done this before and if so what I need in order to install if I need additional parts. Thanks in advance!
My first post,
I have had my 1hz engine drilled and tapped for oil feed and return.
What I'm looking for is the fitting that goes into the skirt fir the oil return same as 1hdt.
The part number i found and ordered is 12258-17010 which doesn't have a thread, looks like it needs another part.
Any...
When fitting the driver's side axle seal, it went a bit too far, about 1.5mm. It is not flush with the inner lip. Does anyone think this will be an issue and leak?
Hi all,
I wanted a cliche LRD hoodie/t-shirt, but printed on clothing that was better quality and actually fits me (I'm 6'6, so clothing can be difficult to find that fits).
So! I made my own designs in Photoshop and built some products on a print-on-demand platform. I pushed the items to Etsy...
I was working on bleeding my brakes yesterday and noticed that when my daughter was pushing on the brakes that brake fluid was spraying out where the brake line mates to the proportioning valve? Will a bad proportioning valve do that. The flare on the brake line looks ok to me. Any advice would...
looked around an couldnt find a straight answer. checked the FAQ's and nothing exact.
real basic question, and maybe this will reveal my ignorance, but Ive only owned two cars, 89 isuzu trooper, and 82 troopy, but are all the brake fittings on later model cruisers the same?
I ask because I am...
So I am trying to install the hardtop. And I never had the metal piece that rivets to the fiberglass lid . I got that piece but it does not seem to want to fit 🤔. But I really do not know how it is supposed to fit . I am just trying to go off old holes right now
Looking for some help here with trying to identify a couple AC connections.
The backstory is that I purchased a Nippon Denso AC evaporator and control box for inside the cab, and all vintage air components are going to be used in the engine compartment.
On the Denso AC unit, I need to...